0%

0%

ElectroBoy

Electronics is my passion. I am not professional, Always learning something new. I am good at soldering, designing pcb, Arduino

Melbourne, Victoria AU

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/03/2022.

My Projects

No means to run a amplifier without proper supply and filter circuit. After all this help to go beyond the limits.

High power Rectifier and Filter for Amplifiers

There are a lot of cheap audio bluetooth IC available in cheap these days. I got a bunch of them and here is my project.

I Made my own Audio Bluetooth module

I made this really amazing PCB for INTEL 8051 microcontroller in the form factor of an Arduino UNO. See how to build your own one.

INTEL 8051 as Arduino UNO?

This a very good alternative to wireless microphones available in market. It is cheap and do the same job. let's explore BT communication.

SPY Bluetooth Microphone

I designed this amplifier using TPA3116d2 ic and PCB is fully assembled by JLCPCB SMT assembly service. let's see the performance of this.

Class D 50x2watt amplifier using TPA3116D2

This is compatible to any fast charger and you can monitor 2 parameters (current and voltage) in real time.

I made my own USB DOCTOR!!

View all 55 projects

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2015 Hackaday Prize

A full stack project dedicated to easily collecting, analyzing and sharing IoT sensor data.

analog.io - A full stack IoT platform

luke-beno Luke Beno

a digital signal processor with integrated multi-channel amplifier for high-fidelity speakers.

DSP 01: hi-fi audio signal processor

The 2015 Hackaday Prize

Professional quality, 24 bit, 192kHz audio breakout board for Teensy 3.x, Raspberry Pi, and more.

Teensy Super Audio Board

rf-william-hollender RF William Hollender

Hackaday Prize 2019

An Off-the-grid messaging system.

Skrypt

The 2016 Hackaday Prize

Replicate an Apple-1. Or an OSI Challenger. Or something else. Design your own 6502 computer by programming it.

L-Star: Software-Defined 6502 Computer

jac-goudsmit Jac Goudsmit

BBC Micro:Bit connected to LoRaWAN network

JUST DO IoT

richard.ibbotson

Yet another homebrew computer based on 65C02 CPU

DB6502

dawid-buchwald Dawid Buchwald

The 2016 Hackaday Prize

This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).

A new high accuracy tilt sensor

aron-molnar Aron Molnar

An analog gauge to show your computer's CPU utilization

Analog CPU Gauge

adam-fabio Adam Fabio

making a digital audio recorder, with an ESP32 instead of a DSP.

ESP32 audio recorder

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

niftyled is a plugin based open source framework to control LED devices using pixmaps.

niftyled

The 2015 Hackaday Prize

PICkit can be used as a PIC Programmer, Serial to USB converter, Logic Probe, Logic Analyzer, but also as an AVR Programmer for Atmel MCUs

Microchip's PICkit 2 as an Atmel STK500 programmer

Re-configurable Sub-1GHz RF remote control with BLE & USB. Can receive, transmit & analyze RF spectrum.

GollumRF: Sub-1GHz RF hacking tool

Emulate Citroen's Lexia / Actia Diagnostics tool to query the CAN bus and log the results to SD card.

CAN Diagnostics Logger with Arduino CAN shield

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

exciting project using arduino and python

RADAR

View all

Bits

Keith wrote 11/30/2022 at 21:39

This page is just a link farm advertising a PCB maufacturer.

Are you sure? yes | no