0%

0%

e.reining

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/30/2017.

Projects I Like & Follow

The 2018 Hackaday Prize

A powder and inkjet 3D printer based on HP45 inkjet technology

Oasis 3DP

Single rotor, "singlecopter", selfmade drone with air vanes for position control as a full remake of the Ball-Drone Project

The Ball-Drone Project MK II

benjamin-prescher Benjamin Prescher

Hackaday Prize 2019

Small and powerfull controlling unit powerd from USB-C-PD

USB-C-PD Soldering Pen for Weller RT Tips

thomas-leputsch Thomas Leputsch

The 2017 Hackaday Prize

A scaleable approach to multi extrusion, easy to adopt in most CoreXY/H-Bot printer designs.

Tool Switching - Multi Extrusion

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

a 3d printed electromechanical clock

TORLO

ekaggrat-singh-kalsi ekaggrat singh kalsi

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

Easy to build but very capable and handy DIY solder paste dispenser built mostly from cheap Ebay components and modules.

Low cost solder paste dispenser

kevarek kevarek

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

Automated device to apply solder paste onto a PCB without using a stencil

Solder Paste dispenser

anuradha-gunawardhana Anuradha Gunawardhana

Adding a missing feature to IKEA's smart lighting system - toggle on door open/close.

Making IKEA smart lights smarter

Tomasz Cybulski

Embedding addressable RGB LEDs (WS2812/Neopixel) in a 3D printed Christmas tree to have a nice diffusion effect.

Embedded LED 3D Printed Christmas Tree

Open-source design for a 3d printer that can print metal at a low cost.

FDM 3D Metal Printer

Replacement PCB for TS100, adds USB-C PD to every hackers favourite tool!

Otter-Iron - TS100 USB-PD hardware mod

jana-marie Jana Marie

A differential screw is used to make a finely adjustable Z=0 endstop for a 3D printer.

Differential Screw Z-Axis Optical Endstop

mark-rehorst Mark Rehorst

The 2018 Hackaday Prize

Inspired by the attempts of other people around the Interwebs, I use a motor as a rotary encoder, but with a different approach.

Motor as Encoder

Christmas tree shaped PCB that interlock for a 3D effect with individually controlled RGB LED for festive light patterns.

Interlocking PCB RGB LED Christmas Tree

An Arduino UNO-based classic kitchen timer with LCD display and buzzer

How to make a Arduino Kitchen Timer

View all

Bits