0%

0%

FabLab München

The fablab in Munich, Germany

Munich, Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 05/27/2021.

My Projects

2021 Hackaday Prize

A DIY digital stereo-microscope. Low cost. Open source software and hardware. For electronics inspection, soldering work and more.

Stereo Ninja

FabLab München

Projects I Like & Follow

The 2018 Hackaday Prize

The Automatic Infinite 3D Printer (i3D) gives anyone the power of a factory.

Automatic Infinite 3D Printer

My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.

Desktop Arcade Machine : 3D Printed + RetroPie

Christopher Tan

Portable electronic device to measure air and noise pollution

Street Sense

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

Hackaday Prize 2019

LP3D is an (almost) fully lasercut, low component count 3D printer with all linear motion components cut directly into the frame.

LP3D: A fully lasercut kit 3D printer

A clock that uses electro mechanical flip displays

7 Segment Flip Display Clock

Spencer Spencer

RGB LEDs Triangular/Hexagonal Pixels Matrix.

RGB HexMatrix | IOT Clock

This will emulate the AVR code right out of the .ELF file

Arduino ATmega 328 Emulator

Run Stremio on Raspberry Pi with a kiosk look

Hack to run Stremio on Raspberry Pi

The 2017 Hackaday Prize

Datalogger WIFI and Bluetooth for the IOT product

IOT Datalogger

Universal Arduino Wireless Shield

RadioShield

Create a monitoring station to measure weather, soil, seismic, solar, magnetic, and gravity conditions - focus best accuracy/dollar w/COTS.

Climate & Environment Monitoring Station

This elegant timepiece, accentuated with a moiré pattern kinetic sculpture at its center, displays time with a vibrant array of LEDs.

The Moiré Clock

We established this project in order to perform some Robotic skills. PICTO92 is a mobile line follower robot

Line Follower Robot (PICTO92)

Taking an RC Car and converting it to a SLAM Vehicle.

Simultaneous Localization and Mapping Vehicle

There are point and click cameras, but there is no point in existence of this one

No point IR camera

A home brew 2716 (16kbit) PROM programmer performs by setting addresses and data with toggle switches byte by byte

Fully manual PROM programmer

Muscle electrical stimulator for force feedback in Virtual Reality

NEURODRIVE

View all

Bits