0%

0%

Fábio Gil

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/31/2017.

My Projects

Project inspired by 8-bit breadboard computer of WRKits and Ben Eater Youtube's channels (with updates).

Build an 8-bit computer

fbio-gil Fábio Gil

Projects I Like & Follow

The 2018 Hackaday Prize

PDP-11 compatible motherboard in mini-ITX form factor

PDPii

Inspired by the video series by Ben Eater, I am developing a set of printed circuit boards for the simple as possible computer.

SAP 1 Computer on Printed Circuit Boards

The 2018 Hackaday Prize

JACA - Just Another CPU Again Homebrew CPU, starting by a simple POC 4-bit CPU on circuit simulator soft. (done), then 8-bit (in progress)

JACA 1 & 2 Homebrew Computer

andre-baptista Andre Baptista

ESP8266 Based air compressor controller with WiFi.

IOT Air Compressor

boris-van-galvin Boris van Galvin

A mixed reality shooting gallery using virtual reality tracking hardware.

Mixed Reality Room Scale Shooting Gallery

richard-hogben Richard Hogben

A 16-bit CPU, with 16 registers, described in 66 lines of code - with HDL, emulators and a macro assembler.

OPC-5 - a CPU for FPGA, in one page

Designing and building my own 8-bit computer from scratch with 74xx (TTL) logic chips

DM-01: 8-bit 74xx computer

ruud-van-falier Ruud van Falier

My take on Ben Eater's breadboard computer

8-bit breadboard TTL CPU

ruud-van-falier Ruud van Falier

8-bit breadboard computer from 7400 series TTL ICs

ANDOR - 8-Bit Breadboard computer

kiss-blint Kiss Bálint

An 8 bit breadboard computer based on the Malvino SAP-2.

Homebrew Machine 2

brandon-reinhart Brandon Reinhart

This homebrew 4-bits computer is made of nands, diodes, transistors and passive components. Its program is encoded by LEDs.

The Nand 565: a computer programmed by LEDs

olivier-bailleux Olivier Bailleux

Based on the design of the Parrot Jumping Sumo Robot but militarized to allow for higher jumps and most importantly multiple jump heights

Jumping Search-and-Rescue Robot

sinclair-gurny Sinclair Gurny

My HBC-56 - a retro 65C02/TMS9918A/AY-3-8910 homebrew computer fully emulated on a single Raspberry Pi Pico

PICO-56: 65C02 + TMS9918A on a Pi Pico

troy-schrapel Troy Schrapel

Successfully authenticate IBM Watson IoT Cloud with the STMicro Nucleo with MEMS gyro, accelerometer, magnetometer, temp, pressure sensors.

IBM Watson IoT Cloud Authentication w STM32 Nucleo

Internet-Of-Things open project - connect to the web, monitor data and control onboard LED with CC3200 and a simple web application.

Monitor Data and Rmote Control from a WebApp

After googling without finding a compact gripper I decided to build one myself!

COMPACT GRIPPER

dannyvandenheuvel

Hardware and engineering group for the Los Angeles tech community.

Los Angeles Hardware Chat

shulie-tornel Shulie Tornel

Open Source Flying Robots

HooperFly

rich-burton Rich Burton

View all

Bits

Dusan Petrovic wrote 10/23/2019 at 13:59

Hello @Fábio Gil - Thank you for following my #Homebrew CPU list.

Are you sure? yes | no

Ed S wrote 05/28/2018 at 10:44

A nice homebrew CPU suitable for the https://hackaday.io/list/25846-homebrew-cpu list, @Dusan Petrovic ?

Are you sure? yes | no

Dr. Cockroach wrote 04/13/2018 at 14:37

Good morning Fabio and thank you for the follow / like for my #The Cardboard Computer - IO is my name adventure

Are you sure? yes | no