0%

0%

Frederico Souza Sant'ana

.

Londrina, PR, Brazil

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/10/2014.

My Projects

Auxiliar display that shows some information from my car ECU through OBD ISO 9141-2 bus

OBD Dash display

Frederico Souza Sant'ana

Reusing telecom board from trash bin as FPGA Dev Board.

DIY FPGA Dev Board

Frederico Souza Sant'ana

Using one smartphone as a RPM gauge for my car

Smartphone RPM Gauge

Frederico Souza Sant'ana

Projects I Like & Follow

Simple FPGA based PCB to capture thermal images from a FLIR Boson camera on to a microSD.

Boson Frame Grabber

Learn FPGA Design from the ground up with Verilog

FPGA Bootcamp #1

Hackaday Prize 2019

An homemade FPGA board with an Arduino STM32, "Multicomp" compatible

"The Thing": FPGA + STM32

Put your Verilog on real hardware, real cheap

FPGA Bootcamp #3

In old PCB's i found a low-capacity FPGA(CPLD) - EPM7064. I decided to make a small evaluation board.

The FPGA evaluation board - Frankenstein

The 2018 Hackaday Prize

Inspired by the attempts of other people around the Interwebs, I use a motor as a rotary encoder, but with a different approach.

Motor as Encoder

Reverse-engineering how this unique LCD display works.

SAAB 9-3 'ICM2' Display Hacking

Upgrades for my previous RC car project

YaRC Vehicle V4

This is the second part (DDR SDRAM) of the FPGA tutorial that guides you step by step from basics to implementation.

Learning FPGA And Verilog-Beginner’s Guide Part 6

In this tutorial I'll show you how to use a wireless Playstation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

Arduino Robot With PS2 (PlayStation 2) Controller

What if TFT LCD is never invented? Here is the CSTN LCD monitor.

CSTroN - CSTN LCD monitor

Most FPGA projects will have at least one state machine. Learn how to create these powerful little dedicated CPUs in your designs.

FPGA Boot Camp #4: State Machines

An ECP5 FPGA and a FT60x FIFO USB 3.0 bridge. Useful for high speed data transfers to external hardware.

Kilsyth: ECP5 FPGA and a USB 3.0 FIFO bridge

Konrad Beckmann

Providing power for a variable bench power supply

DIY power pre-regulator

documenting a reverse-engineering attempt

Mystery Module

Dashboard that reads data from OBD2 device (bluetooth) and displays it on LCD screen and LED strip.

OBD2 based dashboard

"BlackMath" is a small DSP board, based on Blackfin BF592A, using an Arduino-compatible as loader and PC interface.

BlackMath

Marcellus Pereira

Networked remote control on FPGA SoC

netpp node

View all

Bits

danjovic wrote 04/17/2020 at 15:27

Obrigado por me seguir e aos meus projetos.

Are you sure? yes | no