0%

0%

Feri

Arduino/AVR hobbyist

Slovakia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/20/2014.

Projects I Like & Follow

Yet another Raspberry Pi Computer (non-official carrier board for CM4).

MirkoPC -> CM4 carrier board

A mostly printed digital microscope powered by a Rasperry Pi Zero W

Pi Microscope

2021 Hackaday Prize

A physical switch for my computer to choose between Linux and Windows

Hardware boot selection switch

Stephen Holdaway

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

Clyde D. Corpuz

Open-source wire bending CNC machine for wires at 1mm and less in diameter.

Precise Wire Bending Machine

Design, development and build of open-sourced SLS 3D Printer.

SLS4All - Affordable SLS 3D Printer

It's a Walkie-Talkie based around the ESP32. It transmits audio using either UDP Broadcast or ESP-NOW.

ESP32 Walkie-Talkie

Chris G Chris G

An ESP8266 , a ILI9341 display, a few buttons to build a working ZX Spectrum

ZX Spectrum emulator with ESP8266

This is my 3D printed 3-axis motion control slider for my DSLR camera.

3-Axis Camera Slider

In this project we try to build a cheap AR module that you can use with your regular glasses.

uGlass: an AR module on your glasses

Ultimate Robotics

2021 Hackaday Prize

Wireless device for measuring temperature, humidity and pressure with a e-paper display, with a weather forecast, batteries -operated

Mini weather station Efekta with e-paper display

Andrew Lamchenko

2021 Hackaday Prize

3D printed quadruped with a tiny BOM

Tardygrade

A Clock style barometer, that displays the current weather with different slides, driven by an arduino, 5 servos a PCA9685 and a bmp280.

Tempestas II, A Clock style Barometer

2021 Hackaday Prize

Basic design concepts for a 3D printable maypole braiding machine with bobbin carriers designed with tension control.

Braiding Machine - Maypole Braider and bobbins

2021 Hackaday Prize

An Arduino and Python powered task light that uses AI object detection to track and follow your hand.

3D Printed Hand-Following AI Task Light

Single axis barn-door style star tracker for long exposure astrophotography

Astrophotography Star Tracker

RGB Matrix Clock with Chimes, Cuckoo Sounds, Animation, Event Notification, Temp, Humidity and Barometric Pressure

RGB Panel Clock with Animation and Sound

V-USB and low component count, all through-hole technology

THT feather with ATMEGA8

View all

Bits

Vittorio Loschiavo wrote 07/03/2018 at 14:39

Thank you for following my project https://hackaday.io/project/86962-lawnmower-robot

Are you sure? yes | no

ottoragam wrote 10/10/2016 at 03:32

Thanks for the follow!

Are you sure? yes | no

Patrick Van Oosterwijck wrote 08/23/2016 at 14:58

Thank you for following #LiFePO4wered/Solar1! :)

Are you sure? yes | no

danjovic wrote 10/29/2015 at 08:36

Thank you for following KeyPass!

Are you sure? yes | no

Radu Motisan wrote 06/20/2015 at 09:34

Thank you for following uRADMonitor!

Are you sure? yes | no