0%

0%

Gerriko IO

Dedicated IoT and M2M solution developer, unlocking value by connecting and protecting things. https://twitter.com/GerrikoM2M

Dublin, Ireland

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/13/2018.

My Projects

Repurposing a low cost slow cooker to provide a simple (and maybe a more energy efficient) way to reflow PCB's

Using a Slow Cooker to reflow your PCB's

gerriko-io Gerriko IO

PN7150 Controller FeatherWing with snapable NFC PCB Trace Antenna (fits within a Feather Tripler board)

PN7150 Near Feather Field Controller

gerriko-io Gerriko IO

This FeatherWing board converts RS232 to TTL and then to I2C, and vice versa. Includes RTS and CTS in case needed.

RS232 to TTL/I2C FeatherWing

gerriko-io Gerriko IO

Projects I Like & Follow

The 2016 Hackaday Prize

Robotic Exoskeleton for Grip Enhancement and Stroke Rehabilitation

BEOWULF

chad-paik Chad Paik

2021 Hackaday Prize

This watch has 200 leds and an ESP32 pico for superb light shows

The 603-200 watch

An arduino and LCD display time in seconds using an optimized QR library by @ch00ftech and an optimized LCD library by @xark

Enigma QR Clock

arduino-enigma Arduino Enigma

Angle of arrival 2.4GHz radio signal direction finding

Micro MUSIC

charlie-smith Charlie Smith

The 2017 Hackaday Prize

A portable Raspberry Pi that you can access with your smartphone and use as a Bluetooth receiver to stream music to a pair of speakers.

Portable Raspberry Pi Bluetooth Receiver/Player

Supplyframe DesignLab: 2023 Hackada…

Magnetically Levitating and driving small scale version of a Hyperloop

Mini Hyperloop - Magnetic Levitation Train

adrian-prinz Adrian Prinz

The 2017 Hackaday Prize

For only $10, sense if a senior citizen falls and be alerted, or they could just press a button to send an alert as well.

Elderly Autonomous Fall Detection

Ever had an automatic Sliding Gate installed at your house only to open and close it manually. An easy method to get the system running.

Sliding Gate Automation

lasith-ishan Lasith Ishan

Hackaday Prize 2020

'The Sunflower' is an Arduino based solar tracker which will increase the efficiency of the solar panel while charging.

Sunflower - Arduino Solar Tracker

Decawave DWM1000 and an ATSAMD21 ARM Cortex M0 in the Adafruit feather form-factor for projects requiring localization

UWB Localization Feather

DIY RC transmitter/receiver system based on SX1280 chipset. This module can be used as a transmitter or an 8 channel receiver.

Redundant RC transmitter & receiver

varadi-gyorgy-aka-bodri Varadi, Gyorgy aka bodri

Raspberry PI waiting for a signal from PIR sensors and sending emails with pictures taken by cameras. RFID reader to easily disarm ii

Home security with Raspberry PI and cameras

With the push of a button you can dispense treats and watch your pet in real time without having to be in the same room.

IoT Treat Dispenser for Pets

This project will cover the basic hardware and software aspects of using the EFM8 series of microcontrollers from Silicon Labs.

Getting Blinky going for EFM8 MCUs

Use your phone as a remote controller for a Raspberry Pi controlled chassis

Bluetooth Low Energy Controlled Tank

quintin-balsdon Quintin Balsdon

This charger allows my phone to tell it when battery is full, so it will turn off the power.

BLE Auto Shutoff USB Charger

Open source, P2P-based, surveillance camera.

P2Surveil

The 2018 Hackaday Prize

Let's allow the robots to identify things they see using a convolutional network (CN) based image classifier

Robot Vision Module

neil-k-sheridan Neil K. Sheridan

View all

Bits