Close
0%
0%

kostas

GourtzRacing

greece
Following
Send a private message
Similar accounts worth following
1 Followers
21 Following
0 Projects
0 Likes
kostas
Send a private message

This user joined on 11/13/2018.

112.3k
1.2k
105
387
A powder and inkjet 3D printer based on HP45 inkjet technology
Project Owner Contributor

Oasis 3DP

yvo-de-haasYvo de Haas

66.6k
367
92
321
A completely automated way to take photo's and convert them into a 3D-object
Project Owner Contributor

Arduino controlled photogrammetry 3D-scanner

brian-brockenBrian Brocken

50.7k
5.4k
30
191
FREE and Open Source, Arduino Due based Telescope Control GOTO
Project Owner Contributor

rDUINOScope Boiana

dessislav-gouzgounovDessislav Gouzgounov

15.1k
7k
33
85
This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).
Project Owner Contributor

A new high accuracy tilt sensor

aron-molnarAron Molnar

15k
6.2k
3
30
Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO
Project Owner Contributor

Arduino raw data 3.5" Floppy reader

lukas-vacekLukas Vacek

11.4k
1k
14
35
Try to decode the CAN Bus inside the car and perhaps use it for automation and control
Project Owner Contributor

Smart ForTwo CAN Bus Reverse Engineering

daniel-velazquezDaniel Velazquez

8.2k
4.1k
5
34
Always wanted to unleash the power of an FPGA chip? Interested in robotics and vision? Then this might be the project for you!
Project Owner Contributor

FPGA-based camera vision for everyone

dennisvanelterendennisvanelteren

7.3k
24
3
9
Goal is to make a two step rev limiter with anti-lag in order to spool the turbo on my truck quickly for launch.
Project Owner Contributor

DIY Two Step/Anti Lag for turbo/launch control

daniel-johnsonDaniel Johnson

7.2k
7.2k
3
13
Using an esp8266, arduino nano, a salvaged usb power supply, and a couple relays you can automate anything
Project Owner Contributor

Home automation on the cheap

thjubeckthjubeck

6.4k
2.9k
1
22
Be able to make & upload MagSpoof with variable tracks, to use it without Arduino dependencies, and implement it on the same Raspberry GPIO.
Project Owner Contributor

MagSpoofPI

salvador-mendozaSalvador Mendoza

5.9k
2.2k
12
24
A simple bipedal robot controlled by Micro:Bit
Project Owner Contributor

Micro:Bob

dehipudeʃhipu

3.9k
760
0
7
Make a smart doorbell for less than $40 with simple components, no special skill and in just 1 hour!
Project Owner Contributor

DIY smart home doorbell for less than $40!

naranincNaranInc

3.1k
2.9k
1
11
A first attempt for a small, attractive and practical soldering station, a project designed not by the cost but rather the experimentation.
Project Owner Contributor

AVR Soldering Iron

manosManos

2.3k
2.3k
10
19
A 3D Printing desktop arm that can write and draw!!!
Project Owner Contributor

DARM

liaoqiayuanliaoqiayuan

2.3k
2.3k
2
10
Z-Wave development board Z-Uno + Touch pad detector chip TTP223 + Livolo glass + Batteries CR2032
Project Owner Contributor

Create Z-Wave capacitive touch switch on batteries

vitaliy-yurkinVitaliy Yurkin

2.2k
2.2k
0
20
A cheap to produce and easy to assemble robot for use in STEM education.
Project Owner Contributor

E.R.N.I.E

sebastian-goscikSebastian Goscik

1.7k
16
0
6
Soldering station using InvIoT U1 (arduino compatible) board.
Project Owner Contributor

Soldering Station, Arduino Compatible

inviot-dimitri-synodinosInvIoT Dimitri Synodinos

811
547
0
5
The blueprint for future exoskeletons
Project Owner Contributor

The Exoskeleton Map

zander-fosterZander Foster

View all

Share this profile

Share

Bits

Send a private message to kostas

Become cool instantly

Create your Hackaday.io profile like kostas and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "kostas", please tell us the reason.