0%

0%

Jesper

Hacker/Nerd from Denmark. Part of the BornHack organiser crew.

Copenhagen, Denmark

Following Follow me

Similar accounts worth following

This user joined on 12/02/2021.

Projects I Like & Follow

Low/zero cost upgrades for the Monoprice Select Mini 3D Printer.

Monoprice Select Mini Maximum 3D Printer Mods

us-water-rockets U.S. Water Rockets

Building an open source robot arm for makers and small businesses

5+ Axis Robot Arm

dan-royer Dan Royer

Official Hackaday Prize Entry

I will be attempting to build a guided rocket using of the shelf parts

Guided Rocket

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

Official Hackaday Prize Entry

Arduino powered rocket stabilization system for mid to high power rockets that gets rid of the pitch over and subsequent downrange flight

Arduino rocket stabilization system [UD: 7/14/17]

The 2017 Hackaday Prize

3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer

Arcus-3D-C1 - Cable 3D printer

daren-schwenke Daren Schwenke

An interface breakout board for Raspberry Pi Compute Module 4, permanently attached to a 7" IPS touchscreen display

Raspberry Pi CM4 Сarrier with Hi-Res MIPI Display

sasha-shturma Sasha Shturma

Rpi B+ and Webcam security system with motion, dvr, and remote access.

Raspberry Pi Security System

Mike [Cazzwell] Cassell

Secure ESP8266 MQTT proof of concept

Secure ESP8266 MQTT p.o.c.

w-taylor W. Taylor

Emulate Citroen's Lexia / Actia Diagnostics tool to query the CAN bus and log the results to SD card.

CAN Diagnostics Logger with Arduino CAN shield

The 2015 Hackaday Prize

A small accelerometer, thermometer, altimeter, SD card logger, with a radio downlink. Does not include Kerbal life support.

Model Rocket Data Logger

mdasilva M.daSilva

The 2016 Hackaday Prize

A set of designs to facilitate teaching and intuitive understanding of the relationship between electricity and magnetism

Electromagnetic Teaching Aid

adam-smallcomb Adam Smallcomb

A dual band VHF/UHF module based around two AX5043 radios. Built to work with HAM Radio communications using AFSK and G3RUH modulations.

VUHF Radio

An open-source dual-channel SDR Raspberry Pi HAT with up to 6 GHz tunable range

CaribouLite SDR for RPI

david-michaeli David Michaeli

2021 Hackaday Prize

Reliable hardware designed by robots

SOL75 - a 3D customizer

2021 Hackaday Prize

This is an all in one spectrum and logic analyzer, robotics control platform, and modular synthesizer with audio in and sheet music out!

Rubidium 2.0

The 2018 Hackaday Prize

I made this mini crossbow just for fun so i can shoot at things with toothpicks.

Mini 3D printable crossbow

brian-brocken Brian Brocken

The 2015 Hackaday Prize

Using an Raspberry Pi connected to a shortwave radio to monitor shortwave activity and produce an alert when there is activity on the radio.

Shortwave Radio Alert

View all

Bits