0%

0%

Nathan

Network engineer

Harrisburg, Pennsylvania

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/20/2016.

Proud member of

My Hackerspaces

Local hackerspace for makers, tinkerers, and people who want to make things and learn.

Make717

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

Always jealous of people who could afford big Nixie Tubes, I rolled my own alternative with WS2812Bs and laser cutting!

"Lixie", an LED alternative to the Nixie Tube

lixie-labs Lixie Labs

The 2016 Hackaday Prize

Open hardware and software blood glucose meter using electrochemical test strips

Open source Arduino blood glucose meter shield

m-bindhammer M. Bindhammer

An resin 3D Printer working with LCD and UV LED's.

uTopiaPrinter (SLA)

sbastien-mischler-aka-skarab Sébastien Mischler (aka skarab)

The 2016 Hackaday Prize

This project is to build a motorized gimbal mount to convert a laser distance module into a 3d LIDAR.

Open LIDAR

caveradam caver.adam

The 2016 Hackaday Prize

Did your test strips just get more expensive? Has the drug store run out of strips for YOUR meter? Like to be able to use any test strip?

Universal Glucometer

tom-meehan Tom Meehan

The 2016 Hackaday Prize

A programmable glucometer powered by a Raspberry Pi Zero

Raspberry Pi Glucometer

jonathan-buchanan Jonathan Buchanan

The 2016 Hackaday Prize

We are updating the microscope using open source materials to make microscopy accessible globally

Internet of Things Microscope

This project is an improved Lua SDK, based on ESP-IDF/ESP8266_RTOS_SDK, for Esp32 (comp The hardware , developed by DOIT Team.

LuaNode For ESP32

myembed myembed

Revision 2 of tiny linear servo extender totally revorked and improved. Much easier to assemble, tight fit and robust design

3D-Printed Linear Servo Extender

roger-rabbit Roger Rabbit

The 2016 Hackaday Prize

Use your lasercutter to make an optics bench.

Lasercut Optics Bench

peter-walsh Peter Walsh

The 2017 Hackaday Prize

Affordable, Rugged, Secure and Open Hardware for battery powered connected things with ESP32.

Hornbill

sandeep-patil Sandeep Patil

Putting two steppers on a single driver is dumb. Four doubly so. Here's a stepper driver breakout.

A4988 Stepper Driver Duplicator

The 2016 Hackaday Prize

This project is about exploring whether it is possible to make a RepRap control system that can be made by a RepRap.

RelayRepRap

willstevens will.stevens

I acquired a great little EN104 Bay Networks 'Netgear Hub'. I decided to re-purpose it to house a little Pi Zer0.

Pi Zero PC by Bay Networks (The Pikelet)

The 2016 Hackaday Prize

Have a via on a circuit board that needs to be tested, but can’t or don’t have a connector? just use the ViaConnect.

ViaConnect Circuit Board Test Tool

david-spinden David Spinden

This is the Machinist's Hammer fabricated during the Tormach Lathe Training class.

Machinist's Hammer - Lathe Training Project

supplyframe-designlab Supplyframe DesignLab

View all

Bits

Tom Meehan wrote 07/02/2016 at 05:05

Thanks for following https://hackaday.io/project/10865-universal-glucometer

Are you sure? yes | no

David Spinden wrote 06/02/2016 at 16:33

Glad you liked the ViaConnect project! Hope it helps enable an idea of yours.

Are you sure? yes | no

Patrick Van Oosterwijck wrote 05/12/2016 at 17:17

Thank you for following my #LiFePO4wered/Pi project!

Are you sure? yes | no