0%

0%

orig_maljee

electronics project follower, love been a hobbiest and tinkering with all sorts

uk

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/16/2014.

Projects I Like & Follow

Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.

DIY Pick and Place

A mostly printed digital microscope powered by a Rasperry Pi Zero W

Pi Microscope

I upgraded my cheap $154 3D printer into a high quality 3D printer with 3D printed parts which you can download for free.

Upgraded cheap 3D printer into a high quality

Mateo Miličević

The lead-acid batteries of my off-grid solar system are dead. I will replace them by a 18650 batteries stack housed in a big wooden box.

A 110 kWh Powerbucket

Michel Kuenemann

Flashing alternative firmware forceWare on Arris/Motorola Surfboard SB6141 using a Tin Can Tools SPI Hook.

Flashing forceWare on SB6141

Lucas Rangit MAGASWERAN

Hackaday Prize 2019

Convert your bicycle to electric in seconds. No tools or skills required

BikeOn

Shushanik Khachaturian

The 2015 Hackaday Prize

CANcrusher is an Open Source CANbus development system for hackers and developers interested in a low-cost alternative to the $$$$ systems.

CANcrusher Car Hack / Development Platform

A touchscreen control panel for Grbl controllers with MPG handwheel and hardware inputs.

Touchscreen Control Panel for Grbl

Re-configurable Sub-1GHz RF remote control with BLE & USB. Can receive, transmit & analyze RF spectrum.

GollumRF: Sub-1GHz RF hacking tool

Add a WIFI link to an UpLift Desk and control it remotley

UpLift Desk wifi link

The 2015 Hackaday Prize

The project uses Solar Energy to pump water for Agricultural and domestic consumption.

Solar Water Pump

This device switches between two 230V 50/60 Hz AC power sources within a period (less than 20 ms). Application: off-grid solar systems

An On-Line AC power source selector

Michel Kuenemann

Using 2 IKEA Lack Tables I am creating a Large Format 3d printer with a build platform of X 340mm Y310mm Z 300mm

PRINTTABLE an affordable, attractive 3d printer.

It can measure capacitance from 10 pF to 10,000 μF

DIY simple Arduino Autorange capacitance meter

mircemk mircemk

Laser cutter usage notes

The Technique of Laser

Hackaday version of ToolZ

Hack ToolZ

I want to build a cheap IMSI catcher/StingRay using a raspberry pi, or using other products. Also need coders to help code for the product.

IMSI CATCHER / STINGRAY CREATION

Modify the SD card reader to release miso line

SD CARD READER MISO HACK

View all

Bits