0%

0%

Marko Kukovec

Electronic and programming geek.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/14/2016.

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

The 2018 Hackaday Prize

An open-source, 3D printed, high precision robotic arm with trainability

Dexter

haddington-dynamics Haddington Dynamics

An resin 3D Printer working with LCD and UV LED's.

uTopiaPrinter (SLA)

sbastien-mischler-aka-skarab Sébastien Mischler (aka skarab)

The 2017 Hackaday Prize

A computer invented, designed and built from scratch. Custom CPU on FPGA.

A2Z Computer

The 2016 Hackaday Prize

A simple and inexpensive way to image and analyze subtle surface details on objects.

Affordable Reflectance Transformation Imaging Dome

Leszek Pawlowicz

The 2016 Hackaday Prize

A project that I started in 2014, aimed to develop a low cost and modular refreshable Braille system

MOLBED Modular Low cost Braille Electronic Display

madaeon Madaeon

The 2017 Hackaday Prize

An axial compressor that is designed to be produced inexpensively by the daily hobbyist

3D Printed Axial Compressor

The 2017 Hackaday Prize

WiFi connected, solar powered, ePaper

WiFi ePaper

frank-buss Frank Buss

The 2016 Hackaday Prize

Add an old SDRAM DIMM to your SBC for a 133MS/s 32-bit Logic Analyzer, add ADCs for a Scope...

sdramThingZero - 133MS/s 32-bit Logic Analyzer

eric-hertz Eric Hertz

Paxcounter is a proof-of-concept device for metering passenger flows in realtime. It counts how many mobile devices are around.

ESP32-Paxcounter

The 2016 Hackaday Prize

A super cheap decently resolving open source VIS-spectrophotometer. The cheapest in the OtterVIS line.

OtterVIS LGL spectrophotometer

esben-rossel esben rossel

The 2016 Hackaday Prize

CNC desktop machines are expensive and complicated. This machine changes all that.

Sienci Mill One: Simplifying Desktop CNC Milling

andy-lee Andy Lee

The 2016 Hackaday Prize

This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).

A new high accuracy tilt sensor

aron-molnar Aron Molnar

Weekend build of a clean burning incinerator for a family member. Based on an EPA approved design.

Vortex barrel incinerator

daren-schwenke Daren Schwenke

The 2016 Hackaday Prize

An easy, cheap and open source way to add IoT to a light switch.

Theia IoT light-switch

Documenting the internals of the first gen for hobby use

Pano Logic Zero Client G1

The 2017 Hackaday Prize

WiFi/BLE --> LoRa bridge

LoRaNeT32

View all

Bits

Daren Schwenke wrote 11/06/2018 at 22:14

Thanks for the follow of my #Vortex barrel incinerator project!

Are you sure? yes | no

Patrick Van Oosterwijck wrote 08/04/2016 at 16:28

Thank you for following #LiFePO4wered/Pi Marko!

Are you sure? yes | no

Sébastien Mischler (aka skarab) wrote 07/28/2016 at 06:09

Thanks for following the uTopiaPrinter project. Peace.

Are you sure? yes | no

Eric Hertz wrote 07/23/2016 at 21:26

Howdy, yo! Thanks for the follow!

Are you sure? yes | no

Eric Hertz wrote 04/11/2017 at 00:32

//And another!

thanksAgain++

Are you sure? yes | no