0%

0%

M Go

M Go

Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/22/2016.

Projects I Like & Follow

The 2016 Hackaday Prize

An FFT spectrum analyzer for machinery vibration analysis, using open source hardware and software

Open Source FFT Spectrum Analyzer

ariel-quezada Ariel Quezada

The 2018 Hackaday Prize

Useful STM32L082-based devices with embedded LoRa radio modem programmable with the Arduino IDE via USB connector, i.e, hackable.

Hackable CMWX1ZZABZ (LoRa) Devices

kris-winer Kris Winer

The 2016 Hackaday Prize

A tiny wireless capsule camera for medical imaging or space-constrained environments

Tiny Wireless Capsule Camera

ryan-bailey Ryan Bailey

3D Print yourself some of these magazines to keep your shop organized and boost your pick and place productivity!

SMD Component Magazines

robin-reiter Robin Reiter

Simple solution to direct solder fumes away from your workbench while remaining wireless, portable, and quiet.

Solder Fume Extractor - Battery + USB

A device for monitoring electricity usage in realtime with inexpensive and non-invasive hardware.

Three Phase Smart Electricity Meter

Using an Arduino and a pair of servos to create a laser show on a sheet of luminous vinyl.

Laser Galvo: Arduino Controlled

robives robives

The 2016 Hackaday Prize

Low cost IoT platform for Arduino Nano and Raspberry Pi under 9USD for all parts (included shipping) base on Ebay seller.

Low cost (~ 9$) IoT for Arduino and Raspberry Pi

The 2018 Hackaday Prize

Self-Powered IoT Node for Environmental Sensing

SPINES Mote

The 2018 Hackaday Prize

A minimal breakout board with breadboard friendly spacing and self locking solderless headers exposing all the pin's of this ESP-32 module

ublox NINA-W102 minimal breakout

michel-racic Michel Racic

USB Type-C/PD Analyzer is an Open Source Hardware/Software tool that helps you test, debug and explore USB Type-C/PD Devices.

USB Type-C/USB PD Analyzer

USB, thermocouple temperature measurement with cold junction compensation, system fan control, button for restart and restart to bootloader

T962/T962A Controller Upgrade

Designing an IoT device to monitor and report the fill level of bins for holding recyclable discards of various kinds.

Bin Level Monitoring

kris-winer Kris Winer

The 2016 Hackaday Prize

GrumpyCases Is All About Making Awesome Cases Freely Available

GrumpyCases: OpenSorce Cases For Open Hardware

michael-ratcliffe Michael Ratcliffe

Program an Automation controller PAC using FORTH in Linux

May the FORTH be with Opto22 PAC and Linux

Absolutelyautomation

Automated, smart trash can to separate recyclables from landfill waste

TrashBot

Two-Relay control with any Pi Model, Plus a complete Web page!

Hardware Control with any Pi

ted-mieske Ted Mieske

This is a case for LiV Pi. LiV Pi is an open source indoor air quality monitor.

Raspberry Pi : Acrylic case for LiV Pi

alfredc AlfredC

View all

Bits

Kris Winer wrote 05/08/2019 at 16:09

Thanks for following my Bin Level Monitoring project!

Are you sure? yes | no

Radu Motisan wrote 07/16/2017 at 10:42

Thanks for the follow. You know what this is all about, right?

Are you sure? yes | no

Ryan Bailey wrote 05/29/2016 at 11:03

Thanks for the skull! #Tiny Wireless Capsule Camera

Are you sure? yes | no