0%

0%

Chris Crosswhite

Old guy who enjoys soft and hard hacks

Beltsville, MD

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/27/2014.

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

The 2015 Hackaday Prize

Monitoring soil moisture at different depths to determine when to irrigate, and - more importantly - how much water is needed. Save 25%!

Vinduino, a wine grower's water saving project

reinier-van-der-lee Reinier van der Lee

The 2017 Hackaday Prize

Soldering pen for Weller RT tips with OLED display

RT Soldering pen

A low-power E-Paper weather display powered by an ESP32 microcontroller. Utilizes the OpenWeatherMap API.

ESP32 E-Paper Weather Display

I stole from every one. The huzza from Adafruit. Matts breakout board. Al1s board from here. NodeMCUs DevKit.

Ignore this ESP8266 board

The 2015 Hackaday Prize

LiFePO4 battery technology, made easy for makers

LiFePO4wered/USB

patrick-van-oosterwijck Patrick Van Oosterwijck

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

An ESP32 based weather station investigating ESP32's Deep Sleep and ESP-NOW

ESP-NOW Weather Station

kevin-kessler Kevin Kessler

This projects tracks my efforts to develop discrete LED-Transistor logic building blocks and designing a CPU from them.

LCPU - A CPU in LED-Transistor-Logic (LTL)

The 2016 Hackaday Prize

An easy, cheap and open source way to add IoT to a light switch.

Theia IoT light-switch

The 2015 Hackaday Prize

The MobileNode is an open source GSM/GPRS and GPS/GLONASS 7cm circular board with a fully Arduino compatible MCU.

MobileNode

camilo-rojas Camilo Rojas

The goal of this project is to create an 8-bit 32khz class d amplifier, using filterless topology, controlled by an Attiny85

TinyD, 8-bit stereo class D amp from Attiny85

george-gardner George Gardner

Supplyframe DesignLab: 2022 Hackada…

Ultra low power monitoring of temperature, humidity, pressure, reed contacts and motion. With Encryption!

Canique Ambience

canique canique

The 2016 Hackaday Prize

This is an Arduino-compatible, vertically-mountable microcontroller board made entirely of TH components

Vertically mounted Arduino for Breadboard

clovis-fritzen Clovis Fritzen

The 2017 Hackaday Prize

A sweet Arduino shield with a ton of cool sensors for physiological parameters such as heart rate and breathing rate

Biomed Shield for Arduino 101 Powered By Intel

orlando-hoilett Orlando Hoilett

What's a breadboard?

Random-Ass Breakouts

jarrett Jarrett

Hack a Brother label cartridge

Brother Label Tape Hack

The 2015 Hackaday Prize

The base goal of this project is to build a simple, low cost, water quality testing system.

Inexpensive Water Quality Testing System

View all

Bits

Radu Motisan wrote 04/23/2015 at 17:00

wow - thanks for following uRADMonitor. I have a new project on the role, check that out if you want: https://hackaday.io/project/4977-portable-environmental-monitor

Are you sure? yes | no

Eric Tsai wrote 07/20/2014 at 17:01

Thanks :)

Are you sure? yes | no

Alois Mbutura wrote 06/30/2014 at 18:14

Thanks for the skull on my
project ''camera
autocenter''.Will update it very
soon after 3D printing afew
items

Are you sure? yes | no

Alois Mbutura wrote 06/30/2014 at 18:10

Thanks for the skull on my project ''camera autocenter''.Will update it very soon after 3D printing afew items

Are you sure? yes | no

Sugapes wrote 06/30/2014 at 16:16

Thank you for the skull to my Cheap and Easy to Build 3D Printer project.

Are you sure? yes | no

vysocan76 wrote 06/30/2014 at 13:25

Thank you for the follow and skull :)

Are you sure? yes | no

bijtaj wrote 06/27/2014 at 22:54

Thanks so much for the skull and follow!!!!

Are you sure? yes | no

bijtaj wrote 06/27/2014 at 16:49

Thanks for the follow! It would be greatly appreciated if you would so kindly skull my project as well... Thank you!

Are you sure? yes | no