0%

0%

Chris Weiss

Neophyte hacker of embedded, flying, extruding, receiving, and computing things.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 05/29/2016.

Projects I Like & Follow

A 252 electromagnet-matrix that controls Ferrofluid

Fetch: A Ferrofluid Display

applied-procrastination Applied Procrastination

Hackaday Prize 2019

A dynamics oriented quadruped for research and education.

SmallKat: An adorable dynamics oriented robot cat

kevin-harrington Kevin Harrington

A re-creation of the minimoog using Teensy 4.0

Teensymoog

pierre-loup-m Pierre-Loup M.

A touchscreen control panel for Grbl controllers with MPG handwheel and hardware inputs.

Touchscreen Control Panel for Grbl

uriah-liggett Uriah Liggett

Hackaday Prize 2019

This is a design for a low-cost extruder for printing objects directly from recycled plastic flakes instead of using filament.

Trash Printer - Recycled Plastic 3D Print Head

sam-smith Sam Smith

Supplyframe DesignLab: 2023 Hackada…

Raspberry pi based open source device with SDR and easy to use controls for exploring RF signals and data.

SDR dock 1.0

kaushlesh-c-kd9vfu Kaushlesh C. ( KD9VFU )

DIY Skirt with 120 Neopixel LEDs and motion detection

Neopixel LED Skirt

Kinetic sculptures based on Nautilus gears

Nautilus Sculptures

vipin-m Vipin M

Hackaday Prize 2019

An ESP32-based open source audio synthesis platform suitable for eurorack modular synthesizers, <1ms latency, 44.1kHz samping rate.

Eurorack audio synthesis platform

robert-manzke Robert Manzke

Supplyframe DesignLab: 2023 Hackada…

A contraption to help feed solder efficiently single handed.

One Handed Manual Solder Feeder

a custom three axis cnc machine for carving candles.

CNC Candle Carver

john-opsahl John Opsahl

A kinetic sculpture made using 3D printing and laser cutting with two mechaduinos for friction compensation

Electrokinetic sculpture

martijn-schouten Martijn Schouten

The goal of this project is to reverse engineer the Alexa dash wand.

Wandy

A project initially based on Grant Searle's "CP/M on breadboard" and heavily inspired by RC2014

Baffa-2 Homebrew Microcomputer

augusto-baffa Augusto Baffa

STM32WB55 host with microphones and accelerometers and lots of memory for vibration and sound analysis

Mothra: Acoustics Laboratory on a Stick

kris-winer Kris Winer

RF is black magic and we're going to learn about it here!

Remoticon: Basics of RF Emissions Debugging

Motion, sound, and light interactive LED sculpture powered by the Pixelblaze controller

Glow Flow

Learn the principles of analog audio synthesis and how to create new sounds using voltage-controlled oscillators, filters, and amplifiers.

Introduction to Modular Synthesis using VCV Rack

View all

Bits

Kris Winer wrote 03/27/2021 at 16:07

Thanks for liking my Mothra: Acoustics Laboratory on a Stick project!

Are you sure? yes | no

data wrote 08/10/2019 at 10:47

Dear Chris, thank you for following my project at https://hackaday.io/project/163505-cc2531-usb-adapter-antenna-mod

Are you sure? yes | no

Patrick Van Oosterwijck wrote 09/07/2018 at 19:35

Thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project Chris!

Are you sure? yes | no