0%

0%

andre.milette.dev

Software developper

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 06/24/2016.

Projects I Like & Follow

The 2017 Hackaday Prize

Food dehydrators are conceptually very simple. Let's see if they are that easy in practice.

Food dehydrator - simple and cheap

The 2018 Hackaday Prize

The Reflowduino project is a complete ecosystem of open-source hardware designed specifically for DIY reflow control!

Reflowduino - Wireless Reflow Controller Ecosystem

timothy-woo Timothy Woo

Portable device that emits XRays when the trigger is pulled. No battery necessary. Can be used to safely test radiation detectors.

XRay emitter device made from a barbecue lighter

A small railgun , augmented with neodymium magnets and powered from a single LIR2032 rechargeable coin cell battery.

Coin cell powered railgun

A collection of small ideas

Microhacks

ted-yapo Ted Yapo

Miniature module for indoor localisation

LPS2 nano

gran-nordahl Göran Nordahl

ESP32 as bluetooth tracker

iTAG - ESP32

Raspberry Pi + Camera Module + Dynamixel AX-12A Servos

Raspberry Pi Robot Arm With Computer Vision

tobias-kuhn Tobias Kuhn

Simple technique for transferring a laser print to a copper-clad board without the use of a laminator or iron.

Heatless Toner Transfer (PCB)

Optically Isolated USB to Serial Adapter. Up to 2Mbaud. 1.8-5V logic. No electrical connection between your device and the USB port.

Optically Isolated USB-UART Adapter

Actually just an adaptation of an existing guide to the better-available Lexmark E360d

haxmark – Direct Laser PCB Printing

fruchti fruchti

The now classic conversion of an aquarium pump, and what you probably shouldn't do too..

P1 - Aquarium to vacuum pump conversion

daren-schwenke Daren Schwenke

Portable super small low cost 3D SLA printer with a 30mm^3 print volume.

SLA 3D Printer HaD Super Con 2017 Badge Hacking

jacob-christ Jacob Christ

A study for a simple pick-and-place head using a servo and an injection needle instead of a hollow-shaft stepper motor and a standard nozzle

simple pick-and-place head

michael-mayer Michael Mayer

The 2017 Hackaday Prize

Lumos mimics the natural light of the Sun in order to regulate sleep-inducing hormones & improve sleep using Machine Learning

LUMOS: Smart Lamp for Better Sleep

A PCB milling machine with automatic toolchanger that doesn't cost €10k

Fully automatic low cost PCB milling machine

An 40cm x 30cm PCB with two LED matrices on top (144 LEDs each) to show a realistic flame.

LED Matrix Candle

The 2018 Hackaday Prize

Simple and fast build SMT component placing device

Super Simple SMT placement

View all

Bits

Morning.Star wrote 07/13/2017 at 22:01

Hey Andre, thanks for the follow #Jacking Ampy, I hope you found something useful in there :-)

Are you sure? yes | no

Makertonika Labs wrote 06/05/2017 at 19:15

Thanks for following my PSU project.

Are you sure? yes | no

Dennis wrote 03/28/2017 at 02:17

Thanks for following my project Anna2 aka A2 the agbot!

Are you sure? yes | no

ksk wrote 08/24/2016 at 16:45

Thanks for following my project.

Are you sure? yes | no