0%

0%

Krzysztof

Programmer

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/17/2016.

My Projects

The 2017 Hackaday Prize

Electromagnetic servo actuator for robots which will combine pneumatic speed and working principle with electronic control.

Electromagnetic linear servo

Projects I Contribute To

A delta-style circular 3D printer with an infinitely extendable number of extruders.

Multibot3d

Projects I Like & Follow

Like a hole puncher, but for metals. For your shelf or desktop.

Sinker EDM Machine

dominik-meffert Dominik Meffert

2021 Hackaday Prize

HP 63/302/123/803 cartridge control module with 3D printable mount.

HP printer cartridge control module

pavel-semenov Pavel Semenov

2021 Hackaday Prize

Waste plastic turned into raw material for 3D printing.

My machinery 2021: Direct Granules Extruder

norbert-heinz Norbert Heinz

2021 Hackaday Prize

A versatile sensor platform with expansion and customisation capabilities [dev]

[HEX]POD - Climate Tracker & Digital Nose

ebender eBender

Quadrifilar helix antenna for GPS/GNSS

Active GNSS antenna

marc-andr-denis Marc-André Denis

Circuit sculpture jig consisting of a vacuum pump attached to a silicone pad to keep rods and SMD components in place when soldering them.

Soft Soldering Jig

Open-source design for a 3d printer that can print metal at a low cost.

FDM 3D Metal Printer

Monitor pellet boiler status via CAN bus, measure fuel usage - RE + engineering = profit !

PelletMon - IoT for central heating / boiler.

Measuring the flatness of a surface with a laser and a webcam to microns over large surfaces.

Real-time Laser Measurement with a Webcam

bryan-howard Bryan Howard

2021 Hackaday Prize

A resilient strip (of tape measure fame) triad fed through centrally driven rollers extends a structure constrained by self spacing ribs

OBoom: low cost deployable linear actuator

the recipe how to create metal things better than ever

Self-Created Metal Composites

A mostly printed DIY CNC Head for cutting mat boards for picture framing.

DIY Mat Board Cutter CNC Head

TRACEPaw is a sensorized paw for legged robots using silicon deformation, a camera & a microphone to infer the 3D force & the terrain type.

TRACEPaw: Smart Paws for Robot Dogs

autonomous-robots-lab Autonomous Robots Lab

A Hot-Wire Cutter for Plastic Sheets

Hot-Wire Plastic Cutter

dominik-meffert Dominik Meffert

bone-like metal composite structure

Metal bone

Easy 3D printable seven segment digit powered by 14 WS2812 LEDs.

"pxlDigit" - a 3D printed seven segment digit

For a group competition, SAFMC, we were required to design and build a plane and navigate it through an obstacle course within time limit.

Stable, efficient RC plane

this opener will open Mars for us

Mars opener

View all

Bits

Dominik Meffert wrote 03/07/2020 at 08:37

Hi Krzysztof,

you are a nice person and helped me a lot until now. Thanks for commenting and having conversations with me :)

Are you sure? yes | no

Krzysztof wrote 03/07/2020 at 15:36

Thanks, nice to hear, that I helped, you are very knowledgeable yourself, so I thought that maybe my comments were too obvious for you. You're also very nice, if maybe someday you will be in north poland, maybe we could meet for some beer.

Are you sure? yes | no