0%

0%

Winston

Electronics hobbyist.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/12/2014.

Projects I Like & Follow

Hackaday Prize 2019

I fancied making the smallest possible inspection bot I could and here is what I ended up with, measuring just 65x40x30mm!

Nano Fpv Tank Inspection Bot

Testing and development of a system to cut traces on a blank PCB using electro-discharge machining with pencil lead

PCB Fabrication with EDM

Hackaday Prize 2019

Loko is the 12 gram GPS tracker with extreme battery life.

Loko-the Tiniest GPS tracker with 270 days battery

akio-sato Akio Sato

Hackaday Prize 2020

PiCon One is a multi-function controller for home automation and industrial use cases.

PiCon One

Or how I try to create an exact mechanical (and functioning) replica of the Apollo Guidance Computer DSKY

Accurate Apollo DSKY Replica

mdasilva M.daSilva

Hackaday Prize 2020

Marlin Nextion New Interface

3D printer Interface

dannyvandenheuvel

Supports NTSC/PAL color composite video output, Bluetooth Classic or IR keyboards and joysticks

ESP_8_BIT: Atari 8 bit, NES and SMS on an ESP32

Open Source tested and Proven Model Rocket TVC Gimbal

K-9 Rocket Thrust Vector Control Gimbal

canine-defense-technologi Canine Defense Technologi

The DM-02 is an 8-bit computer built (almost) entirely out of 7400-series (TTL) logic chips.

DM-02 8-bit Computer

ruud-van-falier Ruud van Falier

A very lightweight representation of the venerable Apollo DSKY. Uses a Touch LCD to bypass all the hardware complexity.

ArDSKYlite

mark-wilson Mark Wilson

More than an Arduino

Bittino

Using an Arduino and Python script for testing simple logic I.C.s like 74xx TTL

Simple TTL logic tester

fjkraan fjkraan

A dual stage harmonic drive for simple star tracking

Harmonic Gear Driven Star Tracker

STM8 BASIC™ gives you the power and flexibility you need to program an STM8 microcontroller from your BASIC code - ONLY $9.99 per module.

STM8 BASIC

The 6502 Companion is intended to be a development / learning environment for the 6502 microprocessor.

The 6502 Companion

josh-kittle Josh Kittle

Another processor card for the RC2014 bus

68HC11 CPU Board for RC2014

This project aims to create a GPS antenna array with integrated amplifiers and RF switch on a flexible PCB for optimal GPS reception.

Flexible GPS Antenna Array for Model Rockets

eric-sims Eric Sims

A small kiln with big expectations: Fusing PMC, Solder PCBs, Harden/Temper/Anneal/Carburize Steel, Pottery, Glass, Melting Precious Metals

Small Programmable Kiln

View all

Bits

dannyvandenheuvel wrote 06/14/2020 at 13:24

Thank you for liking my project #3D printer Interface

Are you sure? yes | no

Mr. Piay wrote 01/12/2019 at 20:52

Hi Winston, I'm glad my project #RELAY COMPUTING is of interest to you. I hope you will find my project #SANX-I MICROCOMPUTER interesting as well. Best regards, Javier

Are you sure? yes | no

Kris Winer wrote 08/11/2018 at 16:26

Thanks for following my MAX32660 Motion Co-Processor project!

Are you sure? yes | no

Radu Motisan wrote 07/12/2017 at 21:28

Thanks for the follow. You know what this is all about, right?
You can support this effort directly, by making your own KIT1 units or ordering a complete unit on https://www.uradmonitor.com/join-the-network/
Or even share it to your friends.. thanks!

Are you sure? yes | no

Morning.Star wrote 06/17/2017 at 07:22

Wow, thanks for the follow and skull on #DECAL

Much appreciated :-)

Are you sure? yes | no

Tom Meehan wrote 01/24/2017 at 06:30

Thanks for following my project https://hackaday.io/project/19540-a-maker-loupe . I'll be adding new posts within the next few days so keep a look out.

Are you sure? yes | no

AVR wrote 11/10/2016 at 19:08

Thanks for the skull and follow on my Radio !

Are you sure? yes | no

Patrick Van Oosterwijck wrote 08/23/2016 at 14:57

Thanks for following my #LiFePO4wered/Solar1 project. :)

Are you sure? yes | no

Ted Yapo wrote 05/15/2016 at 02:11

Thanks for the skull & follow on the Diode Clock!

Are you sure? yes | no

Alexander Tuxen wrote 08/14/2015 at 15:23

Thanks!

Are you sure? yes | no

Kert wrote 02/12/2015 at 19:56

Thank you

Are you sure? yes | no

Camel wrote 09/09/2014 at 22:53

Cheers for the follow!

Are you sure? yes | no