0%

0%

Teslafly

electronics enthusiast and ham radio operator

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/14/2014.

My Lists

rt usb_c soldering iron

soldering irons based onthe weller rt tip or things with usb c /pd/qc3.0

Curated by Teslafly

Projects I Like & Follow

Hackaday Prize 2019

High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®

Axiom: 100+kW Motor Controller

Hackaday Prize 2019

I didn't have enough to buy a Lab Bench PSU... So I made one.

OPEN Power

john-loeffler John Loeffler

2021 Hackaday Prize

An Open Source Software Defined Oscilloscope

ThunderScope

A DIY oscilloscope probe to dig small differential signals embedded in high common mode voltages.

A 10X 100MHz Differential Probe

bud-bennett Bud Bennett

8 GHz BW, up to 1 TS/s ET Sampling I have ceased active development on this project. Please don't ask.

8 GHz Sampling Oscilloscope

ted-yapo Ted Yapo

Hackaday Prize 2019

I've been in a clock making sort of mood recently and I've seen tons of word clocks so I thought it was time to give it a try

Small Word Clock

sjm4306 sjm4306

Like a hole puncher, but for metals. For your shelf or desktop.

Sinker EDM Machine

dominik-meffert Dominik Meffert

A better-than-servo motor for robotics

Custom motor for robotics

"Awesome" Mouse - the open source 3D mouse... mouse

OS3M Mouse

coltonbaldridge colton.baldridge

Supplyframe DesignLab: 2022 Hackada…

A Li-ion battery pack which can be charged from an 18V solar panel and can output 230VAC through an Inverter.

Backup Battery Pack

anuradha-gunawardhana Anuradha Gunawardhana

3D Print yourself some of these magazines to keep your shop organized and boost your pick and place productivity!

SMD Component Magazines

robin-reiter Robin Reiter

Hackaday Prize 2019

3D printed hub, filament tires, Mecanum motion.

FilaMecanum

daren-schwenke Daren Schwenke

Supplyframe DesignLab: 2023 Hackada…

Differential scope probe

PD150

Replacement PCB for TS100, adds USB-C PD to every hackers favourite tool!

Otter-Iron - TS100 USB-PD hardware mod

jana-marie Jana Marie

A fully custom Arduino E-Paper BLE clock in a 3D Printed case using nRF52832 with one year run time one a single 18650

Triink - low power BLE E-Paper Clock

aaron-christophel Aaron Christophel

A wearable BMI developer kit for the hackers/makers community to use for the greater good.

A sEMG Brain-Machine Interface.

This opensource PnP machine is almost configuration-free, suitable for fast making PCBA samples.

[CDPnP] Tiny Semi-Automatic PnP Machine

dukelec dukelec

Unique tool and desktop or wind sill trinket to alert when the ISS is overhead.

3D Printed ISS desktop beacon and IFTTT notifier

View all

Bits

Brian Cornell wrote 12/05/2018 at 12:16

Thanks for following TS350! https://hackaday.io/project/159575-ts350-true-sine-inverter

Are you sure? yes | no

Kris Winer wrote 12/05/2018 at 06:27

Thanks for following my Compact, $25 spectrometer project!

Are you sure? yes | no

samern wrote 07/15/2014 at 02:18

Thanks for the follow!!!

Are you sure? yes | no