0%

0%

attila.body

^

Hungary

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/29/2016.

My Lists

3D printing

3D printing

Curated by attila.body

ESP native

ESP native development

Curated by attila.body

Projects I Like & Follow

Collecting snippets that can quickly be copied to assemble a program for different sensors etc. Mostly about ESP8266/32 with Arduino IDE.

ESP cookbook

turo-heikkinen Turo Heikkinen

The 2017 Hackaday Prize

RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.

RepRap HELIOS

nicholas-seward Nicholas Seward

A 3D printed clock in PLA. It has an 8 day runtime with an accuracy of 1-2 minutes per week.

3D Printed Pendulum Clock

The 2018 Hackaday Prize

An efficient and compact generator that can be coupled with wind turbines or water wheels to produce upwards of 100W

Portal Point Generator

Getting up to speed with the ESP8266 SDK has never been easier!

ESP8266 SDK Tutorials

Fully 3D printed x-ray machine using a dental tube and a custom transformer.

3D Printed X-Ray Machine

francisco-piernas Francisco Piernas

The 2017 Hackaday Prize

A scaleable approach to multi extrusion, easy to adopt in most CoreXY/H-Bot printer designs.

Tool Switching - Multi Extrusion

The 2018 Hackaday Prize

An easy to build, setup, and use emergency communicator for disaster-struck zones with no working power or comms infrastructure.

PR-Holonet: Disaster Area Emergency Comms

inventive.prototypes

A 3d printed split-flap display using a 28byj-48 stepper motor

Split-flap display

Independently charge 10 Li-Ion cells @ 1A each, with $18 of Prime parts and an ATX supply.

Minimalist Li-Ion Charger

daren-schwenke Daren Schwenke

The 2016 Hackaday Prize

Low cost IoT platform for Arduino Nano and Raspberry Pi under 9USD for all parts (included shipping) base on Ebay seller.

Low cost (~ 9$) IoT for Arduino and Raspberry Pi

This project is an IoT sensor shield for the ESP8266 and it's Arduino compatible

IoT shield for ESP8266

pedro-minatel Pedro Minatel

The 2018 Hackaday Prize

Arrhythmia Detection using single lead ECG (Hand ECG)

ECG on the Go

nitesh-kadyan Nitesh Kadyan

The 2016 Hackaday Prize

Quoting Einstein "If the bee disappeared off the surface of the globe then man would only have four years of life left.

Save the bees save the planet - IoT hive platform

A weighing scale using a ATmega48, a hx711 ADC and a 1x16 hd44780 display.

Weighing Scale in <1kB Code

The 2016 Hackaday Prize

Easily record and analyze the moves of robots, indivitual joints, ...

Visual Marker Tracking for Robotics

Sky plate for a baby/children room. Stars, clouds, music/FX effects with 1 Arduino and many sensors.

RoomSky

The 2016 Hackaday Prize

A network of automated battery swapping stations for drones to extend their flight duration and provide flight path management.

Hermes - Automated Resupply Network For Drones

View all

Bits

open-plc-com wrote 01/30/2019 at 08:34

Thank you for following my project Using "Blue Pill" STM32F103C8T6 as ST-Link!

Are you sure? yes | no