0%

0%

HParente99

Auto-didact, and entrepreneur specializing in full-system design and development.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 05/04/2017.

Projects I Like & Follow

Hackaday Prize 2019

Modular Open Source Hardware Tablet that is easy to hack and can run a standard Desktop Linux Distribution (or Android)

DLT one - A Damn Linux Tablet!

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

The 2018 Hackaday Prize

high-end open-source printer with a water-cooled tool changer.

Blackbox - Tool Changing 3D Printer

marc-schmann Marc Schömann

Fully 3D printed x-ray machine using a dental tube and a custom transformer.

3D Printed X-Ray Machine

francisco-piernas Francisco Piernas

The 2018 Hackaday Prize

Itsy-chipsy is a chip platform that enables a multi-block service like-oshpark capable to offer area for your own chip, for as low as $100.

Itsy-Chipsy: Make your own $100 chip

The 2018 Hackaday Prize

An Open Source Linear Actuator

Linear PCB Motor

carl-bugeja Carl Bugeja

The 2018 Hackaday Prize

Building all the tools neccesary to make chips at home.

Semiconductors @ Home

Hackaday Prize 2020

A disaster-resilient communications network powered by the sun

Disaster Radio - LoRa Mesh

A Swiss type mill turn center for cutting metal

SwissMak

generic-default Generic Default

The 2018 Hackaday Prize

An open source inexpensive function generator

Inexpensive function generator

Remote print cooling using a centrifugal air pump from a CPAP machine.

The Mother of All Print Cooling Fans

mark-rehorst Mark Rehorst

The 2018 Hackaday Prize

Newest technology in old fashion syle ;-)

BOBOXIE - nixie / vfd tube style desktop clock

Additional system for Delta-Robot One to transport things into the robots workingspace

Conveyor System for Delta-Robot One

pascal-buerger Pascal Buerger

The 2018 Hackaday Prize

IoT enabled indoor horticulture kit (Space Bucket) that can be monitored & controlled via smart contracts on an Ethereum Blockchain backend

Decentralized IoT Indoor Horticulture

Use 3D printing to solve the “Growing Chaos” problem

Germinate Seeds With a 3D Printed Container

Automated terrarium for maintaining natural environment for carnivorous plants.

Carnivorous plants Terrarium

robert-slg Robert Sälg

it's easy to make any short piece of wire straight out of any material in your work desk.

How to make a perfectly straight breadboard wires.

The 2018 Hackaday Prize

A tiny BCI (Brain Computer Interface) located above your ear that will monitor your brain consciousness state and will react to them.

BCD: Brain Consciousness Detector

View all

Bits

roelh wrote 04/01/2018 at 07:26

Hi HParente, thanks for following my "3D brain simulator" NeuronZoo https://hackaday.io/project/19287-neuronzoo

Liking it would be even better !

Are you sure? yes | no

Morning.Star wrote 03/04/2018 at 14:48

Hi there HParente99, thanks for the follow #The Bodyfield Experiment :-)

Are you sure? yes | no

Eric Hertz wrote 02/09/2018 at 01:22

Hey HP99! Thanks for following my linux notes! Hopefully you can find it useful!

Are you sure? yes | no

Radu Motisan wrote 05/23/2017 at 14:28

Thanks for following uRADMonitor! One of my other projects was finalist in Hackaday prize 2015, check it out here: https://hackaday.io/project/4977-portable-environmental-monitor . If you want to support the development of the current work, you can get your own hardware here: http://www.uradmonitor.com/join-the-network/ . Radu

Are you sure? yes | no