Close
0%
0%

Gilles KREBS

Electronics engineer, HW/SW development and innovation addict (kind of geek)

Strasbourg, Alsace, France
Following
Send a private message
Similar accounts worth following
6 Followers
6 Following
0 Projects
0 Likes
gilles-krebs
Send a private message

This user joined on 08/12/2014.

88.4k
1.1k
54
255
How I did to remotely control and monitor my home made Off-grid Photo voltaic System
Project Owner Contributor

My Off-grid Solar System Monitoring

michel-kuenemannMichel Kuenemann

Things I've Built

Advanced Power Meter

The APM project is a Zigbee battery monitoring interface. This project has been published in Elektor Magazine. Project number 110759.

NEMA Stepper Controller

The idea of the NSC project is to add the power and control circuit directly on the stepper motor, in order to make the control more easier. More infos at this link : http://p67world.com/index.php/en/2015-02-08-21-18-29/nema-stepper-controller

Lightning Photography Trigger

The LPT is an interface that can be used mainly for lightning photography, and more generally for high speed photography. More infos at this link : http://p67world.com/index.php/en/2015-02-08-21-18-29/lightning-photography-trigger-2

94.2k
1,233.8k
76
2k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

88.4k
1.1k
54
255
How I did to remotely control and monitor my home made Off-grid Photo voltaic System
Project Owner Contributor

My Off-grid Solar System Monitoring

michel-kuenemannMichel Kuenemann

60k
4.6k
16
216
A Raspberry Pi based Astrophotography System
Project Owner Contributor

StarPi

chrisChris

29.4k
170
29
98
The lead-acid batteries of my off-grid solar system are dead. I will replace them by a 18650 batteries stack housed in a big wooden box.
Project Owner Contributor

A 110 kWh Powerbucket

michel-kuenemannMichel Kuenemann

9.2k
5.2k
2
27
This is a demo project for my Bluetooth Low Energy Mesh Protocol using a simple nRF51822 based board
Project Owner Contributor

Bluetooth Low Energy Mesh Protocol

tim-wilkinsonTim Wilkinson

2.8k
35
4
20
I need a reliable and maintainable spot welder to solder the 18650 batteries of my Powerbucket. This is my version of this basic tool.
Project Owner Contributor

A Microwave Oven Transformer Spot Welder

michel-kuenemannMichel Kuenemann

2.4k
31
22
12
NXP has released a Cortex M0 processor in a tiny BGA 16 package. Why not design a cool break out board for this device.
Project Owner Contributor

YoctoBob - a BOB for an ultra tiny Cortex M0 proc.

michel-kuenemannMichel Kuenemann

1.8k
14
6
14
NXP has released the LPC812 Cortex M0+ controller in an eXtremely Thin Small Package (XSON16) . Why not design a BOB for it ?
Project Owner Contributor

a Break Out Board for an eXtremely Small Proc.

michel-kuenemannMichel Kuenemann

1.4k
1.6k
2
14
Affordable, easy to use and open source Telemetry System for model rockets
Project Owner Contributor

OpenTelemetry

alvin-freyAlvin Frey

1.2k
34
4
11
How I do to use the surplus of energy produced by My Photovoltaic Off-grid System
Project Owner Contributor

Photovoltaic Hot Water production

michel-kuenemannMichel Kuenemann

575
707
0
3
BLE, LED's and a iOS app, all together to illuminate your life
Project Owner Contributor

Bluetooth LE Mood Light

rodrigocurielrodrigocuriel

269
7
0
3
Equirectangular projections for spherical panoramas.
Project Owner Contributor

360° Panoramas

richard-hogbenRichard Hogben

Share this profile

Share

Bits

Michel Kuenemann wrote 07/04/2016 at 09:36 • point

Hello Gillessss,

Merci+++ pour le follow du MOT Spot Welder. 

A+ - Michel

  Are you sure? yes | no

Michel Kuenemann wrote 06/21/2016 at 20:15 • point

Merci - Je me suis remis à Sketchup. Trop efficace pour modéliser avant de réaliser. J'ai pas mal de choses à mettre en ligne au niveau du design. A+

  Are you sure? yes | no

Michel Kuenemann wrote 06/21/2016 at 12:04 • point

Salut Gilles,

Merci pour le like du projet "A 110 kWh PowerBucket".

A +- Michel

  Are you sure? yes | no

Gilles KREBS wrote 06/21/2016 at 19:00 • point

Hello Michel, avec plaisir, ça prend forme et ça a de la gueule! Je vais suivre cela avec attention :)

  Are you sure? yes | no

Michel Kuenemann wrote 03/15/2016 at 19:48 • point

Gilles,

Merci+++ pour le skull / XSBOB

A+ - Michel

  Are you sure? yes | no

Michel Kuenemann wrote 08/20/2014 at 08:15 • point
Ha ha ha - Tu as été rapide comme l'éclair !

Merci en tous cas !

Michel

  Are you sure? yes | no

Gilles KREBS wrote 08/20/2014 at 08:19 • point
Toujours! ;) Ca me permet d'être informé de tes projets.

  Are you sure? yes | no

Send a private message to Gilles KREBS

Become cool instantly

Create your Hackaday.io profile like Gilles KREBS and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Gilles KREBS", please tell us the reason.