0%

0%

Dhananjay

I am an embedded system designer. I write complex logic which needs to drive hardware

India

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/07/2017.

My Projects

This bot can draw on the plain surface. No limitation of canvas size. Make Gcode of your sketch and the snaily bot will draw that for you

Snaily Bot

Design Bicopter frame easy to assemble yet strong enough to handle the component weight.

Bicopter V3

Projects I Like & Follow

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

patrick-van-oosterwijck Patrick Van Oosterwijck

Python library for Raspberry Pi which provides an easy to use interface for the INA219 voltage and current sensor from Texas Instruments.

Raspberry Pi INA219 voltage/current sensor library

The 2016 Hackaday Prize

A wireless vibrating wristband to notify hard of hearing people of telephones, doorbells and other sound alerts.

Shakelet - alerts for the hard of hearing

alex-hunt Alex Hunt

I will test the usability of the RF Explorer 3G+ IoT module from seeedstudio

Basic spectrum analyser with RF Explorer 3G+ IoT

dorijan Dorijan

The idea is to do DSP on a FPGA with audio from microphones. This is a project I've started in order to learn FPGAs and Verilog.

Phased Array Microphone using FPGA

martin-berglund Martin Berglund

The 2017 Hackaday Prize

Remote control web interface with live video for Raspberry Pi Robots

STS-PiLot Robotics Remote Control

mark-dammer-mm0dqm Mark Dammer MM0DQM

Clock, based on a adafruit neopixel ring and particle photon

IoT - Clock

This recipe focuses on the necessary hardware and software to make a device to monitor the health of a plant or plants in a small area.

Open Source Hardware Plant Health Monitor

shane-kirkbride shane kirkbride

Emulate Honda Odyssey 2007 RES DVD player to enable audio/video streaming to RES screen

Hacking Honda Odyssey 2007 RES DVD-player

Hooking arlec RC power switches up to modern home automation systems

Automation - 434MHz Arlec power switches

The 2017 Hackaday Prize

I'm making a Nixie Tube HAT for Pi Zero and Pi Zero W

Raspberry Pi Nixie Tube HAT

maksim-surguy Maksim Surguy

A hammer than only Thor can pick up!

Mjolnir

brandon-hart Brandon Hart

Raspberry Pi and Arduino sensor interface.

B3SI - Space balloon/Robot Sensor Interface

Development of our 3D printed opensource DIYbio centrifuge V.2 and onward.

Opensource 3D Printed DIYbio Centrifuge V.2+

A small, not complicated, retro Console using one or more Arduino Chips.

A retro Console thing running on Arduino

featheroffalcon

Why should precision fabrication be limited to machine shops and fab labs? The Versa3D is your personal desktop fabrication machine.

Versa3D by CreateAll

richard Richard

The Zifnu Rocket Kit #1 combines model making and electronics to create a fun-to-build kit that is designed to inspire and educate.

Laser-Cut Rocket Model Kit & RGB LED Dev Board

The 2017 Hackaday Prize

Using 3D printing and the like we can level the playing field so that all people on Earth can participate in the global economy.

Economic Plan for People Everywhere

les-hall Les Hall

View all

Bits

Patrick Van Oosterwijck wrote 02/12/2019 at 21:55

Thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project!

Are you sure? yes | no