0%

0%

badjasper

I was a Nerd before being a Nerd was cool.

Michigan

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/13/2018.

Projects I Like & Follow

The 2016 Hackaday Prize

This project is a fancy Clock and weather display built around a monitor and a Raspberry Pi.

PiClock - A Raspberry Pi Clock & Weather Display

kevin-uhlir Kevin Uhlir

2021 Hackaday Prize

An Open Source Software Defined Oscilloscope

ThunderScope

The 2015 Hackaday Prize

a tool for electronics engineers/students to use - planned to include basic Voltmeter, Ammeter, Component Tester, Serial Terminal etc

Engineers Multi Tool

If you need a refresher for digital logic before tackling FPGAs, this is the bootcamp for you!

FPGA Bootcamp #0

al-williams Al Williams

The 2016 Hackaday Prize

Add an old SDRAM DIMM to your SBC for a 133MS/s 32-bit Logic Analyzer, add ADCs for a Scope...

sdramThingZero - 133MS/s 32-bit Logic Analyzer

eric-hertz Eric Hertz

Hackaday Prize 2019

A multimeter, based on the STM32F373, which can measure voltage, current and power (both bipolar and DC or true RMS with multiple ranges).

STM32 Open Source Multimeter

The 2016 Hackaday Prize

Dual input 24 bit Multimeter with USB interface, single channel 10 bit USB oscilloscope, PWM out, 2 Ch Data-logger, R, C, Digital sniffer.

Multimeter +

2021 Hackaday Prize

A jumperless breadboard

breadWare

kevin-santo-cappuccio Kevin Santo Cappuccio

Yet another hardware controller for Kerbal Space Program. Leveraging Telemachus, Python and Arduino to drive joysticks, buttons and displays

KAPCOM

The 2016 Hackaday Prize

An all-in-one development platform featuring a Raspberry Pi, an Arduino, a HDMI display screen and a breadboard area.

Pi/Arduino Prototyping

craig-hissett Craig Hissett

A Star Trek away mission themed escape room in a box.

Star Trek Shuttle Console

2021 Hackaday Prize

A Weatherproof case housing three portable monitors allowing for increased productivity no matter where the user is working from.

SOLAR DISPLAY CASE v2.0

brian-whitsett Brian Whitsett

Use a Raspberry Pi with Codesys to control the LED on the EtherCAT Arduino Shield by Esmacat attached to an Arduino Uno.

RaspberryPi with Codesys PLC UI to Control Arduino

esmacat Esmacat

Episode: "The Long Patrol", CORA keeps Starbuck company during a long duration flight and also uses her flying skills to elude the Cylons!

C.O.R.A. from Battlestar Galactica

luke-j-barker Luke J. Barker

A pocket sized battery operatable and low power component tester which can test all the basic electronics components.

Minimal Component tester using Arduino

lithium-ion Lithium ION

The 2017 Hackaday Prize

because the v1 never made out of a vero board, starting part 2 of http://hackaday.io/project/6208

Engineers Multi Tool Part Deux

Projects/Users/Experiments - Acquire ⨋ Analyse ⨋ Share

GinLab - [20700]

gintaras-valatka Gintaras Valatka

A simple cable tester using a 555 as the heart of the system

Cable Test RJ45 / RJ12

View all

Bits

Craig Hissett wrote 05/23/2021 at 22:03

Thanks for following my #Pi/Arduino Prototyping project!

I'm hoping to start a new version of this few soon, with a few Pi boards and a few arduinos to create a whopping great prototyping unit with the ability to test networking based projects as well as python, Arduino and C# projects.

Are you sure? yes | no