0%

0%

thumbedmonkey

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 07/30/2018.

Projects I Like & Follow

Hackaday Prize 2019

3D Printed ESP32 Powered Video Streaming Robot

ESP32 WiFi Robot

Hackaday Prize 2019

Portable Power Platform for Pi Zero

PiSugar Battery for Raspberry Pi zero

Hackaday Prize 2019

I didn't have enough to buy a Lab Bench PSU... So I made one.

OPEN Power

A better-than-servo motor for robotics

Custom motor for robotics

A 3D printed fully mechanical 7 segment display. It can be used without any electronic at all, by turning a gear.

Peters 7-seg all mechanical display prototype 2

Hackaday Prize 2019

Touchscreen for top wall mounting for ESP8266 & ESP32

Top Wall Mount Touchscreen for ESP8266

Raspberry Pi based mini laptop

Spellbook

Hackaday Prize 2019

An Intuitive and Compact Learning Device for the Braille Education of the Visually Impaired.

Knobo

Mechanical tulip sculpture that blooms with just gentle touch and can shine into any color of a rainbow.

Ever Blooming Mechanical Tulip

A sand table project for the Milwaukee MakerFaire

The Spice Must Flow Sand Table

Use this RGB Leds that are in your garage to build your own Lights. As simple as Leds, Ω and soldiering (To be safe max. 30 mA per GPIO)

ESP32-MeshKit custom RGB LED Lamps

Hackaday Prize 2019

Open source hardware smart thermostat for your home.

HestiaPi Touch - Open Smart Thermostat

Inspired by Roger and others, I'm making a SAWPPY-Alike rover, adding my own tweaks and mods.

YASP Yet-Another-Sawppy-Project

In this tutorial I'll show you how to use a wireless Playstation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

Arduino Robot With PS2 (PlayStation 2) Controller

Remora is a simple pseudo animation language that receives UDP short commands to launch LED Animations

Remora

Cellular antenna mast rotator for an RV, which extends/retracts via threaded rod.

BIRTHA - Screw drive antenna mast

Yet another ESP-powered portable messaging device.

miniDenko

ultra thin custom display ... only 11 gpio for 110 leds

Flexible matrix display 22x5

View all

Bits

Radu Motisan wrote 09/10/2019 at 14:41

#Robo-Dog says Bark! Thanks for the like.

Are you sure? yes | no

Dennis wrote 09/09/2019 at 22:31

Hi, Thanks for liking InspectorBot .

Are you sure? yes | no

Dennis wrote 08/12/2018 at 12:26

Hi, Thanks for liking Sun Chaser.

Are you sure? yes | no

Jasper Sikken wrote 08/10/2018 at 19:11

Also thanks for liking my project https://hackaday.io/project/159139-tiny-solar-energy-module-tsem

Are you sure? yes | no

Kris Winer wrote 08/10/2018 at 18:44

Thanks for liking my Ultra-Low Power LiPo Charger via Energy Harvesting project!

Are you sure? yes | no