Close
0%
0%

Elliot Williams

Hackaday Managing Editor, Discoverer, Explainer, Writer

Munich, Germany
Send a private message
Similar accounts worth following
elliot-williams

This user joined on 11/01/2014.

View all

Share this profile

Share

Bits

M. Bindhammer wrote 11/06/2023 at 16:43 point

Ich wußte gar nicht, dass du in München lebst, nur eine Autostunde von mir entfernt :)

  Are you sure? yes | no

mgingerich wrote 09/29/2020 at 15:32 point

Hi Elliot, just wanted to say that your "What could go wrong with SPI" article probably saved a company today. I sent it to a supplier who was having trouble debugging their SPI bus and they immediately solved all the problems using your suggestions. 

  Are you sure? yes | no

Elliot Williams wrote 10/01/2020 at 15:41 point

Hooray!  That's exactly why I wrote that series. 

Most of those mistakes I've made personally -- some of them I just picked up secondhand at the Hackerspace.  

I actually just stumbled on another today: seems some SD card and other modules are poorly designed: include level shifters that don't release/tri-state the MISO/MOSI lines when deselected.  That's a new one to me!  

  Are you sure? yes | no

Daren Schwenke wrote 05/17/2019 at 23:07 point

Thank you for the Likes of #MPRT - Modified planetary robotics transmission and #FilaMecanum , and for your kind words on the HAD podcast today.  I will certainly be dead before I finish some of those projects though..  :)

  Are you sure? yes | no

Elliot Williams wrote 10/01/2020 at 15:42 point

My pleasure!  Love the projects.  

I'd get my remaining to-hack list put on my tombstone, but I'd blow my son's inheiritance on granite...

  Are you sure? yes | no

Brian Cornell wrote 03/06/2019 at 02:46 point

Hi Elliot, thanks for liking the GPIB control console.

https://hackaday.io/project/163886-gpib-instrument-control-console

  Are you sure? yes | no

Laser Developer wrote 01/23/2019 at 14:11 point

Thank you for following and liking Open Source LiDAR - Unruly. Please tell all your friends about it. If there is enough interest we should be able to offer it as an educational kit and maybe do more to promote it as an open source / hackable project - something I know nothing about unfortunately!

  Are you sure? yes | no

Jasper Sikken wrote 11/21/2018 at 12:20 point

Thank you for following my project https://hackaday.io/project/161290-jaspers-electronic-load-r3 Please let me know if you want to write an article about it

  Are you sure? yes | no

Patrick Van Oosterwijck wrote 11/19/2018 at 20:49 point

Hi Elliot, thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project!

  Are you sure? yes | no

Wassim wrote 11/19/2018 at 20:20 point

Thanks for your interest in #STM32 Blue pill IoT expansion boards , actually, the best my Bluepills could achieve is a #Retro smart light project, but since then, I abandoned the STM32 to focus on both nRF52 (for low power, custom mesh, zigbee, Thread) and Esp32 (for connectivity, wifi, mosquitto, json,...)

  Are you sure? yes | no

Wassim wrote 02/25/2018 at 14:42 point

Thanks for your like of #Home Smart Mesh , I just updated it with the new gen of nRF51 buttons compatible with the same nRF24 mesh. Also using the shielded PA LNA, I get a mesh of 2km jump, and x4 walls in buildings.

  Are you sure? yes | no

AVR wrote 12/18/2017 at 17:00 point

Hey Elliot! thanks for plugging my project in the comments of this article 

https://hackaday.com/2017/12/16/if-3d-printer-then-custom-aluminum-extrusion-brackets/

Really appreciate it!

  Are you sure? yes | no

mark wrote 12/07/2017 at 00:11 point

Hi,thanks for following my preject!

  Are you sure? yes | no

Radu Motisan wrote 10/31/2017 at 20:24 point

Thanks for following me!

  Are you sure? yes | no

Wassim wrote 05/15/2017 at 18:39 point

Hello from Stuttgart and thank you for following my #Home Smart Mesh project, if you have any recommendations on how it can more profit to the community that's welcome.

  Are you sure? yes | no

Patrick Van Oosterwijck wrote 04/26/2017 at 22:07 point

Thank you for following my #LiFePO4wered/Solar1 project Elliot!

  Are you sure? yes | no

Stefan Lochbrunner wrote 04/04/2017 at 18:58 point

Hey Elliot, thanks for following, I feel honored! 

  Are you sure? yes | no

Jan wrote 02/17/2017 at 13:20 point

Hi Elliot! Thanks for stopping by and following my clock!
Best wishes and servus to munich!

Jan

  Are you sure? yes | no

Jonathan Bruneau wrote 02/03/2017 at 07:39 point

Thanks for following my project.  https://hackaday.io/project/6273-1w-true-mppt.  Maybe it'll see the light of day, someday (bad pun).

  Are you sure? yes | no

Tobias wrote 02/02/2017 at 02:24 point

  Are you sure? yes | no

Kris Winer wrote 06/22/2016 at 23:11 point

Thanks for the links on your recent ESP8285 post, it drove a lot of traffic to my Tindie amd GitHub ESP8285 Development Board sites. Now if you could just do a post on my Dragonfly STM32L4, Arduino-programmable development board!

  Are you sure? yes | no

Elliot Williams wrote 02/08/2016 at 18:31 point

No problem!  Awesome build.

  Are you sure? yes | no

Become cool instantly

Create your Hackaday.io profile like Elliot Williams and many others