Close
0%
0%

Nicolas Tremblay

Maker at heart. Sadly I rarely have the time to do all I would like to explore. Have kids they said ... P.S. Not a doctor

Montreal, Qc
Following
Send a private message
Similar accounts worth following
4 Followers
29 Following
0 Projects
0 Likes
nicolas-tremblay
Send a private message

This user joined on 11/04/2014.

32.1k
411
34
356
An open hardware reading device that's easy to build, easy to manufacture, and easy to make your own.
Project Owner Contributor

The Open Book

joey-castillojoey castillo

15.2k
186
35
165
Extremely affordable pocket-friendly, designed to provide a wide range of hardware testing and debugging functions in a compact and low-cost
Project Owner Contributor

Felini - Revolutionary Pocket-Sized Electronic Lab

chu-tien-thinh-obitvnChu Tien Thinh (obitvn)

11.8k
81
17
69
Flea-Scope™ is a very low-cost and easy-to-use 18 Msps USB oscilloscope and mixed-signal logic analyzer.
Project Owner Contributor

Flea-Scope USB O-scope (18 Msps, $13 BoM, WebUSB)

richard-testardiRichard Testardi

9.4k
83
5
73
A robot that can be used as desktop tool for small automation and education!
Project Owner Contributor

PAROL6 - Desktop robotic arm

petar-crnjakPetar Crnjak

7.7k
37
0
46
World's Smallest RP2040 Development Board
Project Owner Contributor

RPDot

william-herrWilliam Herr

6.7k
60
10
57
Differential scope probe
Project Owner Contributor

PD150

craig-dCraig D

5.2k
26
8
25
Use the $15 Harbor Breeze Solar Light as a self contained waterproof enclosure for a WisBlock based Meshtastic Node.
Project Owner Contributor

Harbor Breeze Meshtastic Hack

tavisTavis

4.4k
73
14
49
The device tests for continuity and internal resistors within various USB Cables and exposes some pins for multimeter testing.
Project Owner Contributor

USB Sleuth Cable Tester

spencer-maroukisSpencer Maroukis

4.2k
36
2
30
The Dev Kit allows people to connect with solar technology through building and maintaining their own energy-producing device.
Project Owner Contributor

Solar Development Kit

perinePerine

3.1k
135
0
33
Open-Source RC Snowplow that can remove snow from your driveway or sidewalks and can be customized for other tasks around your home.
Project Owner Contributor

SNOWBYTE

cele9999cele9999

2.3k
14
12
14
With the braiding machine it is possible to make uniform braids. It is possible to use up to 12 coil carriers.
Project Owner Contributor

3D printed Braiding machine

fraensFraens

1.9k
10
1
8
An extremely low cost universal tensile testing machine made from 3D printed and commercial materials
Project Owner Contributor

Low Cost Universal Tensile Testing Machine

xieshi-zhangXieshi Zhang

1.5k
14
8
13
Development board for the PY32F002A low-cost 32-bit ARM Cortex M0+ microcontroller
Project Owner Contributor

PY32F002A F15P Development Board

stefan-wagnerStefan Wagner

1.5k
9
0
21
Small tracked robot, inspired by Pololu Zumo - but with many improvements
Project Owner Contributor

Yozh robot

alexander-kirillovAlexander Kirillov

1.2k
7
0
8
The MP2, 300A, 100V ESC
Project Owner Contributor

The MP2, 300A, 100V ESC

owhiteowhite

1.2k
2
0
7
As a quick follow-up to my “A Tile Based MacroPad” I present an alternative.
Project Owner Contributor

MacroPad With Tile Buttons

michael-gardiMichael Gardi

1k
8
2
9
Collaborative Robotic Arm Used as Assistant in an Electronic Workshop And Controlled by Voice Commands and Capsense Technology
Project Owner Contributor

Work-holding Robotic Arm for Electronic Workshop

guillermo-perez-guillenGuillermo Perez Guillen

657
1
0
2
DIY Reflow oven with exhaust for more accurate temperature control
Project Owner Contributor

PCBToast

nabilNabil

View all

Share this profile

Share

Bits

Michael Gardi wrote 11/14/2023 at 00:54 • point

Thanks Nicolas for your interest in my MacroPad With Tile Buttons project. You might want to also check out my related project MacroPad With Tile Holder Buttons PCB Edition.

  Are you sure? yes | no

Darryl Norman wrote 11/29/2022 at 01:19 • point

Thanks

  Are you sure? yes | no

mihai.cuciuc wrote 11/22/2022 at 21:56 • point

Hi, Nicolas! Thanks for your interest in our #Local LoRaWAN infrastructure !

  Are you sure? yes | no

Angel Cabello wrote 09/30/2022 at 15:13 • point

thank for following my project #Galdeano handheld computer 

  Are you sure? yes | no

danjovic wrote 09/30/2021 at 10:56 • point

Hello, Thanks for liking my #Stranger Board project!

  Are you sure? yes | no

robert wrote 04/17/2018 at 12:01 • point

Hi, Thanks for following my project # Box for Resume 3D Print automatically 

  Are you sure? yes | no

Send a private message to Nicolas Tremblay

Become cool instantly

Create your Hackaday.io profile like Nicolas Tremblay and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Nicolas Tremblay", please tell us the reason.