0%

0%

mcchots

Coder, breaker, take aparter.

Johannesburg

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 11/12/2014.

Projects I Like & Follow

The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.

ESP32 WiPhone

The 2017 Hackaday Prize

HeartyPatch is a fully open-source, IoT connected, BLE enabled heart-rate variability & ECG patch with great accuracy

HeartyPatch: A single-lead ECG-HR patch with ESP32

ashwin-k-whitchurch Ashwin K Whitchurch

The 2018 Hackaday Prize

A 75 watt MPPT Solar Charger with tons of features. Efficiency > 97%, USB interface, data logging, 2 USB charging ports and much more...

High Efficiency MPPT Solar Charger

lukas-fssler Lukas Fässler

A PCB mill inspired by open source CNC 3D printers with a custom design to fit standard size copper clad boards (6" x 4" / 160mm x 100mm)

Sub $200 PCB Mill that doesn't suck!

timo-birnschein Timo Birnschein

The 2018 Hackaday Prize

A 1 square inch PCB module with 2 tiny solar cells, a highly efficient Li-Ion charger and with 3.3V and 1.8V output

Tiny Solar Energy Module (TSEM)

jasper-sikken Jasper Sikken

Hackaday Prize 2019

Convert your bicycle to electric in seconds. No tools or skills required

BikeOn

shushanik-khachaturian Shushanik Khachaturian

5 axis CNC controller for hobbyists and anyone looking in to upgrade their lathe, mill, laser cutter, plasma cutter and many more

Super Gerbil, the STM32 based Gcode controller

Hackaday Prize 2019

A multimeter, based on the STM32F373, which can measure voltage, current and power (both bipolar and DC or true RMS with multiple ranges).

STM32 Open Source Multimeter

The STM32F103 BluePill, what's under the hoods of mbed, platformIO, Arduino,...

STM32 BluePill Frameworks Evaluation

The 2017 Hackaday Prize

This project describes the use of Raspberry Pi as an IoT connected vital signs monitor. The HealthyPi HAT for Raspberry Pi used.

Connected Health: Open source IoT patient monitor

ashwin-k-whitchurch Ashwin K Whitchurch

The 2018 Hackaday Prize

This project started when my digger obsessed son said 'Daddy can you make me an Excavator?' So I thought sure how hard can it be....

Plywood Excavator

alex-lovegrove Alex Lovegrove

The standard air conditioner not connected you already have can be hacked to be used with a smartphone

Normal air conditioner becomes wifi controlled

giulio-pons Giulio Pons

Mini blimp flies through hoops! Features 3 DC motors/ propellers, battery charging, and wireless communication.

Remote Control Mini Blimp!

sophi-kravitz Sophi Kravitz

ARM Cortex-M4F based retro inspired handheld game console.

1Bitsy 1UP

piotr-esden-tempski Piotr Esden-Tempski

The 2018 Hackaday Prize

time on the edge

Edgytokei

ekaggrat-singh-kalsi ekaggrat singh kalsi

The 2017 Hackaday Prize

Tiny MQTT-interoperable broadcast mesh networking with simple radios

Low power mesh networking for small sensor grids

A small device to turn one IR remote control's power signal into another's.

Remote Control Translator

clara-hobbs Clara Hobbs

The 2017 Hackaday Prize

It wont look like the elbow elbow cassette player (different)

Open Source Micro Cassette Player

ricardo-ferro Ricardo Ferro

View all

Bits

Wassim wrote 05/06/2017 at 08:06

Thank you for the "like" of #Home Smart Mesh, if you have any questions, ideas or recommendations, you can comment on the project's page.

Are you sure? yes | no

AVR wrote 03/30/2017 at 13:59

thanks for the follow on my RepRap-XY-i2 project!!! Just need to enlarge some holes and I'll have it built over the weekend :)

Are you sure? yes | no

Patrick Van Oosterwijck wrote 08/18/2016 at 18:34

Thank you for following my #LiFePO4wered/Pi project!

Are you sure? yes | no