0%

0%

k1hop

PhD EE with extensive experience in computers, RF, design and manufacturing, and electronics in general.

CT, USA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/27/2014.

Projects I Like & Follow

Single rotor, "singlecopter", selfmade drone with air vanes for position control as a full remake of the Ball-Drone Project

The Ball-Drone Project MK II

benjamin-prescher Benjamin Prescher

Open-source wire bending CNC machine for wires at 1mm and less in diameter.

Precise Wire Bending Machine

ji-praus Jiří Praus

Hackaday Prize 2020

An almost completely 3D-printed servo which is able to pull a car forwards.

3D printed high torque servo/gearbox Version 2

brian-brocken Brian Brocken

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

This is my 3D printed 3-axis motion control slider for my DSLR camera.

3-Axis Camera Slider

isaac-chasteau Isaac Chasteau

Supplyframe DesignLab: 2023 Hackada…

Teensy/Arduino Flight Controller and Stabilization

dRehmFlight VTOL

nick-rehm Nick Rehm

Hackaday Prize 2019

An intuitive and compact device that helps the visually impaired learn braille.

Knobo

gary-peng Gary Peng

Hackaday Prize 2019

Using low cost parts to construct a cable robot with incredible capabilities.

Cable Robot

Design and develop a tank with additively manufactured thread and re-using filament spools as wheels

The Innovation Tank -3D Printed Treads-

yusuke-tanaka Yusuke Tanaka

2021 Hackaday Prize

Fully 3D-printable hydraulics for all your robotics projects

3D-printable double helical gear pump watertight

brian-brocken Brian Brocken

An "effect box" which works as octave-down effect (halves input frequency). No internal oscillator involved, no PLL, just analog maths!

Analog oscilator-less octave-down effect box

ms-boss MS-BOSS

A GUI for touch screens built on Electron.js - Bootstrap for toggling GPIO enabled USB hubs on a Raspberry Pi.

RUNBOX

A reprogrammable replica of the famous TIL311

DIYTIL311

jacob-still Jacob Still

3D Printed Case for the NanoVNA V2 with latching compartment

NanoVNA V2 Case

manuel-tosone Manuel Tosone

A true Quantum Random Number Generator

QRNG

lukas-koch-aka-ast Lukas Koch aka Ast

First prototype of an open kit to bring electric drive to any existing wheelchair for cheap (and -hopefully- safe)

Open electric drive kit for wheelchairs - alpha v

adriajunyent-ferre adria.junyent-ferre

A UPS using refurbished ("second-life") lithium-ion 18650 cells.

Second Life UPS

Supercon 2018 Badge calls out to Hackers and Makers in Morse Code. Didn't understand the message? It is also a Morse Code trainer.

CQ Hackaday, Morse Code the Supercon '18 Badge

View all

Bits

Enki wrote 05/13/2021 at 19:46

Thanks for following my project. If you like li-ion hacks you may also be interested in:

https://hackaday.io/project/179758-a-lithium-ion-cell-precharger

Are you sure? yes | no

Jacob Still wrote 07/12/2019 at 00:11

Thanks for liking and following #DIYTIL311 !

Are you sure? yes | no

oneohm wrote 10/05/2016 at 07:33

Thanks for following! - you might also like my printer:

https://hackaday.io/project/15584-the-printer

Are you sure? yes | no

James Cannan wrote 04/13/2016 at 17:11

Thanks for liking my Tiny Low Cost BLE project!

Are you sure? yes | no

John Leeman wrote 01/19/2016 at 22:29

Thanks for following the 3D Compass!

Are you sure? yes | no