0%

0%

Erik S

Thinker, maker, solder, spry.

Seattle

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/14/2015.

Projects I Like & Follow

Endeavoring to build upon the existing fanbase work of this $200-ish printer.

Monoprice Select Mini Electro-Mechanical Upgrades

michael-obrien Michael O'Brien

The 2015 Hackaday Prize

DIY System on Chip based on FPGA, priced below 5 USD

DIPSY

antti-lukats Antti Lukats

The 2017 Hackaday Prize

Smart power jack for USB Power Delivery

PD Buddy Sink

clara-hobbs Clara Hobbs

Hackaday Prize 2019

The slightly different USB peripheral

pcbtc (GaN edition)

lucy-fauth Lucy Fauth

USB Power Delivery Based Lithium Polymer Battery Charger

LiPow - The USB C LiPo Battery Charger

alex-klimaj Alex Klimaj

Multichannel audio systems based on BeagleBone. Compatible to Linux and Bela's hard real-time environment. In Stock at Shop.Bela.io

CTAG FACE and BEAST Multichannel Audio Systems

henrik-langer Henrik Langer

Hackaday Prize 2019

This is a design for a low-cost extruder for printing objects directly from recycled plastic flakes instead of using filament.

Trash Printer - Recycled Plastic 3D Print Head

sam-smith Sam Smith

The 2018 Hackaday Prize

A living recycling center that eats trash and sunshine and poops recycled plastic objects

The Metabolizer

sam-smith Sam Smith

The 2015 Hackaday Prize

Fast Charging. Charge your portable devices. Use it as a UPS for your BeagleBone/Pi/Home WiFi Network. Or an emergency laptop power source.

Smart Battery, Smarter Power Pack

kumar-abhishek Kumar, Abhishek

The 2017 Hackaday Prize

I made a shortcut keypad which can automate anything at the press of a button! It is programmed with a drag and drop interface I created.

Graphically Programmable Arduino Shortcut Keypad

robin-hartley Robin Hartley

The 2016 Hackaday Prize

Real-time machine-vision based detection of elephants in rural areas: providing warnings to locals and thus prevent human-elephant conflict

Automated Elephant-detection system

neil-k-sheridan Neil K. Sheridan

The 2016 Hackaday Prize

3D print circuits using silver ink and ceramic substrates to make high performance, multilayer, fine line < 3mil, PCBs

DIY Space Grade PCBs

chuck-glasser Chuck Glasser

C++ is an efficient language eminently suitable for use in embedded systems but some look for proof of the efficiency. This is the proof.

Embedding C++

rud-merriam Rud Merriam

Arduino based kit to start bio-engineering

Low cost and open source bio-engineering kit

m-bindhammer M. Bindhammer

(ab)use the I2S + DMA on the ESP8266 to drive some WS2812(b)'s.

ESP8266 DMA I2S WS2812 Driver

Measuring hysteresis curve to determine how useful is that stuff for building motors and magnetic circuits

Measuring BlackMagic3D's ferromagnetic filament

A communication framework between ARM and PRUSS on BeagleBone Black

PRUSS support for newer kernels

shubhangi-gupta Shubhangi Gupta

I like to design a new UI firmware for this 3D printer. But first I had to reverse engineer the UI PCB including the display driver.

Reverse Engineering the Monoprice MP Select Mini

robin-reiter Robin Reiter

View all

Bits

Eric Hertz wrote 01/05/2016 at 13:47

Howdy! Thanks for the follow!

Are you sure? yes | no

Kumar, Abhishek wrote 01/05/2016 at 08:13

Thanks for the skull on #BeagleLogic!

Are you sure? yes | no