0%

0%

paytufo

I´m curious, architect and noob technician.

Spain

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/12/2019.

Projects I Like & Follow

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

guy-dupont Guy Dupont

DIY MMOS ffb STM32 and servo drive servo motor force feedback wheel

DIY MMOS ffb STM32 and servo drive servo motor

huang-jin Huang Jin

Mostly 3D printer Rasppberry Pi 3D Scanner Rig

Raspberry Pi Zero 3D Scanner

vojislav-milanovic Vojislav Milanovic

An open-source, affordable, dynamic quadruped robot

mjbots quad

josh-pieper Josh Pieper

Supplyframe DesignLab: 2022 Hackada…

Open up a 2010 iPad, remove its logic board, and fabricate a new board based around the Raspberry Pi CM4.

Put a Raspberry Pi CM4 into an original iPad

A 3D printer for printing with welding wire

Wire 3D Printer

dominik-meffert Dominik Meffert

Hackaday Prize 2020

Roller cam based portable BVM ventilator.

COSV - Cam Open Source Ventilator

daren-schwenke Daren Schwenke

USB PC gearbox based on arduino with 12 buttons

DIY Simracing H-Shifter (USB PC gearbox)

Read/Write Modbus RTU (RS485) via Ethernet and WiFi use ESP32

Modbus RTU, LAN8720A, ESP32

Hackaday Prize 2020

SOLO is a Motor Controller designed to easily run most types of electrical motors, DC, BLDC, PMSM and ACIM. it's easy to use and versatile.

SOLO, A Motor Controller for All Motors

RGB LEDs Triangular/Hexagonal Pixels Matrix.

RGB HexMatrix | IOT Clock

mukesh-sankhla Mukesh Sankhla

MMOS-ffb independent driver board + wiring method

DIY,MMOS,FFB，wheel force feedback

huang-jin Huang Jin

Hackaday Prize 2020

Battle against Covid-19

DP Ventilator

dannyvandenheuvel

Add Bluetooth speed output to treadmill. Arduino on ESP32 and Treadmill Speed sensor. Zwift compatible with realtime Webpage stats.

Add Bluetooth to Treadmill

I am an avid cyclist and runner on the zwift platform however with my unreliable footpod it is time i made my treadmill smarter than my foot

Make a smart treadmill for Zwift running with $5

ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.

IOT ModbusBox

Hackaday Prize 2020

Suspended Additive Layer Extrusion Manufacturing - 3D Printing extremely large multi-storey structures.

SALEM - Construction 3D Printing

jonknutton jon.knutton

Open source Ardupilot compatible Flight Controller for UAVs

Harpia FC - A Raspberry Pi Flight Controller Hat

gabriel-guimares Gabriel Guimarães

View all

Bits

dannyvandenheuvel wrote 06/29/2020 at 07:08

Thanks for liking my project #DP Ventilator

Are you sure? yes | no

Patrick Van Oosterwijck wrote 05/18/2020 at 17:07

Thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project!

Are you sure? yes | no