0%

0%

Maker-fabs-J

Open-source Hardware/ IoT Hardware / Maduino / ESP32

Shenzhen

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/21/2019.

My Projects

DIY thermal imaging monitor based on ESP32-S3 touch display and MLX90640

DIY ESP32-S3 Thermal Imaging Monitor

LoRaWAN soil moisture sensor based on ATMega328P

Lorawan Soil Moisture Sensor

A badge which is Tiny& Simple Lamp board, with 5 super light LED and a power On/Off switch.

Badge: LED Lamp for Brilliant Ideas

Projects I Contribute To

Hackaday Prize 2019

I've been in a clock making sort of mood recently and I've seen tons of word clocks so I thought it was time to give it a try

Small Word Clock

sjm4306 sjm4306

Projects I Like & Follow

An digital clock made out of 144 7 segment displays

7 Segment display array clock

A re-creation of the minimoog using Teensy 4.0

Teensymoog

pierre-loup-m Pierre-Loup M.

Raspberry Pi Compute Module 4 carrier that plugs directly to HDMI port.

Raspberry Pi CM4 TV Stick

An open-source hiking, pilot, skiing, Signal-App-extending GPS mesh communicator.

Meshtastic

2021 Hackaday Prize

A Tiny, Low Cost, Super Simple Synth for Fun and Learning

MicroSynth: Part Biz Card, Part Synth, All Analog

david-levi David Levi

This clock was made to watch time in an aesthetically and funny way, you will never get bored watching it

Arkaclock: Retro arcade Arkanoid with clock

victor-serrano Victor Serrano

Hackaday Prize 2020

Tiny microcontroller dev board, wristwatch and timer "It's not a smart watch, it's a watch for smart people"

MI/O

m-bindhammer M. Bindhammer

Cheapskate version of Adafruit Feather M0

Fluff M0

dehipu deʃhipu

The pyEC is a pyBoard compatible multipurpose board capable of talking with just about anything on your E-bike.

pyEC, a pyBoard Compatible E-Bike

brian-barrett Brian Barrett

Shaped like a USB stick, ideal for a Raspberry Pi or Jetson. Connect up to 28 devices to a Pi.

StickHub - The Space Friendly 7-Port USB 2 Hub

Evaluation of a ready-to-use Arduino-based device for wireless measurement of soil moisture, temperature and humidity over LORAWan

LORAWAN SOIL MOISTURE SENSOR

This is a product match the anemometer to measure the wind speed, also provide other interfaces and sensor to measure tem, hum, and so on.

wind weather station

A soil Moisture sensor used for greenhouse, as Lora Node

Lora Soil Moisture Sensor

Two Feathers featuring the NXP i.MX RT10xx series Cortex-M7 MCUs.

MIMXRT10xx Feathers (RT1011 and RT1062)

PewPew in a business card form factor.

PewPew Slim

dehipu deʃhipu

Minimal macro keyboard

Keeblet

dehipu deʃhipu

A wireless station that converts RS485 to LoRa, WIFI or Bluetooth.

RS485-LoRa Wireless Station

A cheap& quick DIY way to convert the NVMe SSD(2230) to CFexpress

CFexpress Type B to SSD Adapter Converter

View all

Bits

roelh wrote 01/04/2020 at 09:33

Hi, thank you for following #1 Square Inch TTL CPU ! Liking it would be even better ! You might also be interested in my current project, #Kobold K2 - RISC TTL Computer .

Are you sure? yes | no