0%

0%

NEO160

Worked-repaired & modified industrial Robotics, semiconductor manufacturing equip, Microwave systems, prototype mould making.

Canada

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/06/2019.

Things I've Built

3000 Sq ft double walled house R52. including the 200Amp service wiring, Plumbing, Installed all the HVAC wiring and air ducting. Did all the dry wall & plastering, Total rebuilt a back hoe before digging the foundation. Much more.

Projects I Like & Follow

Hackaday Prize 2020

Ground Penetrating Radar using Arduino

GPRino

mirel-paun Mirel Paun

2021 Hackaday Prize

LVDS, eDP, connectors and controllers - let's learn it all

All About Laptop Display Reuse

A maker friendly capstan based BLDC driven quadrupedal robot kit.

Stanley - the capstan based quadruped kit

Ever wanted to use plastic bottle for 3d printing ? Here is how to !

PullStruder: from plastic bottle to PET filament

jp-gleyzes JP Gleyzes

Make Beautiful Big Labels Practically for Free

Masking Tape Plotter

Hackaday Prize 2020

Mostly 3D printed HAWT windturbine incl. 3D printed disk-generator and brake system.

WinDIY - HAWT Wind turbine

Universal enclosure that can be used as a lab power supply, soldering station or combination of two.

Modular PSU & Soldering station

The PERSEUS-8 is the enhanced version of the minimum configuration type the PERSEUS-7 6502 computer

PERSEUS-8 homemade 6502 computer

mitsuru-yamada Mitsuru Yamada

Supplyframe DesignLab: 2022 Hackada…

Portable spot welder that doesn't need microcontrollers, uses recycled industrial thyristor and mostly off-the-shelf components

Not-so-smart capacitive discharge spot welder

Wojciech "adalbert" J

Supplyframe DesignLab: 2022 Hackada…

Plastic covered photo cells + Supercapacitor with unlimited life

ArmaLamp - Armageddon resistant night lamp

Quadrifilar helix antenna for GPS/GNSS

Active GNSS antenna

marc-andr-denis Marc-André Denis

Like a HP-200LX but better - because 6502

ESP65 Pocket Computer: KIM-I/Apple-1/esp32

A digital clock that displays the time using LED's numbered from zero to ten.

4017 Decade Logic Clock

ian-dunn Ian Dunn

A 6802 homebrew computer named PERSEUS-3 that was the basis of my PERSEUS series computers

PERSEUS-3 6802 homebrew computer

mitsuru-yamada Mitsuru Yamada

Here is how to reuse cheap and strong wiper motors to make an extremely powerful servo motor (linear actuator for exemple)

strong servo motor with a wiper motor

jp-gleyzes JP Gleyzes

Open source near-field probes for EMC precompliance testing

Open Field Probe

jeremy-ruhland Jeremy Ruhland

Supplyframe DesignLab: 2022 Hackada…

I was in desperate need of dehumidifying my new workshop.

Basement Dehumidification & Ventilation

stefanschnitzer stefan.schnitzer

I2C Audio Switcher & Volume Control for up to 16 Bi-Amped zones

Whole House Amplifier

View all

Bits

JP Gleyzes wrote 01/04/2024 at 13:27

thanks for liking #strong servo motor with a wiper motor

Are you sure? yes | no

Mitsuru Yamada wrote 04/29/2021 at 00:26

Thank you for following my #PERSEUS-8 homemade 6502 computer !

Are you sure? yes | no

roelh wrote 10/24/2019 at 06:31

Hi Neo, thanks for liking and following #Kobold K2 - RISC TTL Computer !

Are you sure? yes | no