0%

0%

kweisi50

Engineer doing digital design using with fpgas.

London - UK

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/17/2015.

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.

DIY Pick and Place

anthonywebb anthony.webb

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

Advanced Pick and Place machine

brdMaker

mika-heikkinen Mika Heikkinen

Hackaday Prize 2019

For computer vision learners, drone and robot builders, AR/VR and 360 panorama experimenters. Open source hardware.

StereoPi - DIY stereoscopic camera with Raspberry

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

Open Source Closed Loop Motor Controller

Tarocco

The 2016 Hackaday Prize

MEGA65 is an open-source new and open C65-like computer. Hardware designs and software are open-source (LGPL).

MEGA65 - OPEN 8-BIT COMPUTER

antti-lukats Antti Lukats

T962A Controller Drop-In (using *STM32H7*) This is a drop-in replacement controller board for the T962A reflow oven, using the STM32H7

T962A Controller with 5"/7" Touch TFT (STM32)

Tiny board with a BIG FPGA. SD card, 64mbit DDR RAM, ECP5 FPGA, 64mbit flash, and micro USB. Do more with up to 45k LUTs.

TinyFPGA E-Series

luke-valenty Luke Valenty

32x32 pixel photo&video Raspberry Pi based (tablet-like) camera

PiXel camera

alekseygrishchenko aleksey.grishchenko

(Another) Homemade pick and place machine

Axis

rafael-serrano Rafael Serrano

For this project I implemented a Gcode controller with the Ada language. I use an DIY e-waste CNC machine to test it.

Ada Gcode controller and e-waste CNC machine

Fabien-Chouteau

The 2016 Hackaday Prize

The goal: to make a Pick and Place machine that is small on cost but big on ability

ProtoPnP

An ECP5 FPGA and a FT60x FIFO USB 3.0 bridge. Useful for high speed data transfers to external hardware.

Kilsyth: ECP5 FPGA and a USB 3.0 FIFO bridge

konrad-beckmann Konrad Beckmann

DE1-SoC ARM cores running Linux make ethernet communication to the FPGA relatively easy.

Matlab-to-FPGA UDP communication

bruce-land Bruce Land

A Lattice ECP5 FPGA with DDR3 RAM and 1080p HDMI in a Feather form factor.

HDMI FPGA FeatherWing

brian-gilbert Brian Gilbert

The 2017 Hackaday Prize

Another interactive device for action figures

RGB LED(PWM/I2C) and Sound controller

View all

Bits

RUN.CAM wrote 07/12/2017 at 15:48

Thank you for following RGGBer project. It is now live on

https://www.crowdsupply.com/jie-zou/rggber-dev-kit and we will launch it in Aug 2017 and you may sign up for latest information. RGGBer Dev Kit makes embedded vision development easy!

Are you sure? yes | no

ottoragam wrote 12/21/2016 at 21:56

Thanks for the follow, questions and commets are welcome!

Are you sure? yes | no

ottoragam wrote 12/21/2016 at 21:56

Thanks for the follow, questions and commets are welcome!

Are you sure? yes | no

anthony.webb wrote 01/26/2016 at 15:36

Thanks for following my PNP project! If you have any feedback it would be greatly appreciated!

Are you sure? yes | no