0%

0%

George Ioakimedes

Been there, done that

Sacramento, California

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

https://github.com/GeorgeIoak

This user joined on 02/18/2015.

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

patrick-van-oosterwijck Patrick Van Oosterwijck

The 2018 Hackaday Prize

AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25

Compact, $25 spectrometer

kris-winer Kris Winer

Follow this project to learn how to use FPGAs and incorporate them into your projects.

The Hobbyists Guide to FPGAs

luke-valenty Luke Valenty

The 2017 Hackaday Prize

Smart power jack for USB Power Delivery

PD Buddy Sink

clara-hobbs Clara Hobbs

The 2017 Hackaday Prize

HeartyPatch is a fully open-source, IoT connected, BLE enabled heart-rate variability & ECG patch with great accuracy

HeartyPatch: A single-lead ECG-HR patch with ESP32

ashwin-k-whitchurch Ashwin K Whitchurch

SST - ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

SST - ESP8266 Smart Thermostat WiFi IoT ready

The 2018 Hackaday Prize

A 1 square inch PCB module with 2 tiny solar cells, a highly efficient Li-Ion charger and with 3.3V and 1.8V output

Tiny Solar Energy Module (TSEM)

jasper-sikken Jasper Sikken

The 2017 Hackaday Prize

WiFi connected, solar powered, ePaper

WiFi ePaper

frank-buss Frank Buss

Hackaday Prize 2019

Very recently I was so impressed by a Japanese modern artist who draws golden fish in epoxy. I cannot draw but make circuit. Why not!

Enclose them all in super clear epoxy!

The 2016 Hackaday Prize

A tiny wireless capsule camera for medical imaging or space-constrained environments

Tiny Wireless Capsule Camera

ryan-bailey Ryan Bailey

A mist-based tower system for growing leafy green vegetables

The Little Green Tower

chris-johnson Chris Johnson

A 1" squared ESP32 module that natively takes LiPo batteries, charges them, and doesn't kill them.

uMesh

jarrett Jarrett

The 2017 Hackaday Prize

CNC machine and custom made stepper motor controller to manually pick up SMT components and place them on a PCB with microscopic accuracy.

Manual SMT Pick and Place Machine

capt-flatus-oflaherty Capt. Flatus O'Flaherty ☠

The 2017 Hackaday Prize

A complete LiFePO4 based solar power supply for IoT devices

LiFePO4wered/Solar1

patrick-van-oosterwijck Patrick Van Oosterwijck

Use a USB OTG cable with Android devices for Serial, REPL, and a basic code editor for use withCircuit Python Boards.

Android Circuit Python Editor

Streaming video robot on ropes with winches, for my cat

Tuco Flyer

micah-elizabeth-scott Micah Elizabeth Scott

A Raspberry PI HAT designed to control an aeroponics tower system

SpiroBoard Aeroponics pH / EC / Motor Controller

chris-johnson Chris Johnson

View all

Bits

Aleksejs wrote 11/12/2018 at 22:08

Thanks for following my #Smart, 6 port USB Power meter with 4 port USB 2.0 !

Are you sure? yes | no

Kris Winer wrote 05/10/2018 at 15:34

Thanks for following my $25 Spectrometer project!

Are you sure? yes | no

Patrick Van Oosterwijck wrote 02/23/2018 at 19:41

Thank for following my #LiFePO4wered/Solar1 and #wESP32: Wired ESP32 with Ethernet and PoE projects George!

Are you sure? yes | no