AJW's Profile

Projects I Like & Follow

I wanted to make a low cost drone with all the bells and whistles, so people working with a small budget can get into the drone game. ~$50

View all

Bits

Phil Malone wrote 11/25/2020 at 13:16

Thanks for your interest in my https://hackaday.io/project/175944 project

Are you sure? yes | no

Patrick Van Oosterwijck wrote 09/29/2020 at 16:39

Hi, thank you for your interest in my #LiFePO4wered/ESP32 project!

Are you sure? yes | no

burkethos wrote 05/14/2019 at 02:17

Hello AJW, thank you for taking the time to look at my CUBEx8 project. https://hackaday.io/project/165465-cubex8

I have many more project logs to post as I explore design trade offs and choices. Thanks again!

Are you sure? yes | no

Patrick Van Oosterwijck wrote 08/16/2018 at 21:25

Thank you for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project!

Are you sure? yes | no

Wassim wrote 05/15/2018 at 19:12

Thanks for following #nRF52 Custom Sensor Nodes . The SW is currently working and tested, if you'd like to check it out and have questions, let me know.

Are you sure? yes | no

robert wrote 02/08/2018 at 01:53

Hi, Thanks for following # Box for Resume 3D Print automatically

Are you sure? yes | no

Andrew Bolin wrote 03/21/2017 at 02:09

Thanks for following #Modular Open-Source AV Receiver, and good to see another Aussie on here!

Are you sure? yes | no

Evangelos Petrongonas wrote 12/28/2016 at 18:04

Thank for following ArduGen, I hope you' ll enjoy it and i' ll be more than happy to listen to your ideas and suggestions :)

Are you sure? yes | no

Shoebox wrote 09/03/2016 at 21:46

thanks for the follow!

Are you sure? yes | no

agp.cooper wrote 08/31/2016 at 01:54

Hi Austin,

Thanks for following.

If your interested, the code was built on "Blink without Delay()" type logic so it is quite generic as I wanted to port from an UNO to a WeMos D1 (ESP-12E) without worrying about timing hardware.

The Ticker library I find is quite generic so I intend to re-code for this soon.

If you interested in CNC/GCode then you may find my GCode Filter useful, particularly for laser engravers.

If you have any questions/suggestions just ask/say.

I have one of those "useless" lamps that you have in your photo.

I splashed out and bought a proper one! Money well spent!

I gather you are West Australian?

Regards AlanX

Are you sure? yes | no

Eric Hertz wrote 07/23/2016 at 20:49

Howdy, yo! Thanks for the follow!

Are you sure? yes | no

AVR wrote 05/14/2016 at 22:11

Thanks for the follow on SunLeaf!

Are you sure? yes | no

Alex Rich wrote 12/05/2015 at 02:01

thanks for the follows!

Are you sure? yes | no

John Schuch wrote 07/17/2014 at 19:58

Thank for the skull and the follow Austin!

Are you sure? yes | no

AJW

Projects I Like & Follow

Share this profile

Bits

Become a Hackaday.io Member

Send a private message to AJW

Become cool instantly

Report user as inappropriate