0%

0%

jamesw

Love playing around with this stuff

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/20/2015.

Projects I Like & Follow

Hackaday Prize 2020

Multiplayer Bluetooth controllers adapter for retro video game consoles

BlueRetro

jacques-gagnon Jacques Gagnon

Modified Chroma74 shelf label to be my weather station display. It is 7.4" 3-Color E-Ink units that cost $12 on eBay.

7.4" E-Ink Shelf Label used as a Weather Station

A 1" by 1" 20msps Oscilloscope based on the PIC32MZ

1 Square Inch 20msps Oscilloscope

mark-omo Mark Omo

Build a complete LW, MW and SW (AM and SSB) radio with the Si4735 / SI4732 and Arduino.

Si4735 SSB Receiver Controlled by Arduino

ricardo-lima-caratti Ricardo Lima Caratti

I am in the process of implementing an autopilot on my 42' Uniflite Aft Cabin Cruiser based on the original 1984 hydraulic steering system.

OpenCPN Chart Plotter /w Autopilot and Waypoints

timo-birnschein Timo Birnschein

Easy to build but very capable and handy DIY solder paste dispenser built mostly from cheap Ebay components and modules.

Low cost solder paste dispenser

kevarek kevarek

Independently charge 10 Li-Ion cells @ 1A each, with $18 of Prime parts and an ATX supply.

Minimalist Li-Ion Charger

daren-schwenke Daren Schwenke

Presta valve extension with built-in, no battery pressure sensor. Connect and forget. Indefinite lifetime.

No battery NFC pressure sensor for bike valves

Hackaday Prize 2019

leavening cell at controlled and timed temperature

Leavening Cell

vittorio-loschiavo Vittorio Loschiavo

Hackaday Prize 2019

Open source hardware smart thermostat for your home.

HestiaPi Touch - Open Smart Thermostat

Hackaday Prize 2020

An intelligent clinical thermometer that can distinguish between colds and flu

F°LUEX

m-bindhammer M. Bindhammer

A short, little guide sheet on how to convert Cadsoft Eagle (. BRD) files to Gerber files in the Eagle software.

Cadsoft Eagle (. brd) to Gerber Conversion Guide

A desk clock built from a few Adafruit boards & brass rods for structure/connections.

CircuitPython 7-Segment Character Clock

My trusty KIC microwave oven is no longer functioning, because of a keypad failure. I think it's repairable.

Microwave oven keypad repair

niel-malan Niel Malan

The 2018 Hackaday Prize

Portable, simple and inexpensive test to alert diabetics to elevated levels of Ketones, without the need for blood or urine testing.

Meter to Monitor Ketoacidosis Via Breath

tom-meehan Tom Meehan

Here I build a external GNSS module for mobile devices without or unsatisfactory navigation GNSS option.

GNSS bluetooth module with u-blox NEO8N

My goal was to create and share an open source water monitoring system that was capable of measuring water temperature, pH, and ORP.

Pool Water Quality Monitor

brian-chamberlain Brian Chamberlain

Measure and log ambient Temperature, Humidity, Pressure, Light, Lightning, and Volatile Gasses with a Feather!

Weather Station Featherwing

View all

Bits

Vittorio Loschiavo wrote 07/15/2019 at 05:20

Thanks for like to my project https://hackaday.io/project/164233-leavening-cell

Are you sure? yes | no

Craig Hissett wrote 03/27/2017 at 11:00

Thanks for the follow matey! #Aquariumatic

Are you sure? yes | no