Close
0%
0%

Daniel Wiegert

Nerd since before I could read!

Sweden
Following
Send a private message
Similar accounts worth following
18 Followers
6 Following
1 Projects
161 Likes
daniel-wiegert
Send a private message

This user joined on 07/09/2015.

87k
319
107
161
Open source firmware for Worx Landroid robotic mower.
Project Owner Contributor

Project 'Landlord'

daniel-wiegertDaniel Wiegert

218k
6.8k
186
1.1k
Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.
Project Owner Contributor

ODrive - High performance motor control

oskar-weiglOskar Weigl

33.9k
636
43
124
Low cost PID servo drive for small CNC machinery
Project Owner Contributor

Brushed DC Servo Drive

ottoragamottoragam

31.3k
822
30
151
Imaging at micrometer resolution using a Blu-ray drive
Project Owner Contributor

BluBEAM - a scanning laser microscope

andreasbetzandreas.betz

20.9k
287
19
111
Add an old SDRAM DIMM to your SBC for a 133MS/s 32-bit Logic Analyzer, add ADCs for a Scope...
Project Owner Contributor

sdramThingZero - 133MS/s 32-bit Logic Analyzer

eric-hertzEric Hertz

19.4k
921
12
109
The SubPos Ranger allows you to accurately measure distance or obtain your position indoors for all hobbyist robotics applications.
Project Owner Contributor

SubPos Ranger

bleckyBlecky

18.8k
73
8
47
How to broadcast colored PAL television with a SDR transmitter.
Project Owner Contributor

Analog TV Broadcast of the new Age

marblemarble

17.2k
103
17
83
Design of a UV printer for making exposures of Alternative Photography prints, direct from a digital image
Project Owner Contributor

Direct UV Printer for Alternative Photography

david-brownDavid Brown

16.6k
117
12
130
An ARM based scientific calculator
Project Owner Contributor

Scientific Calculator

ramn-calvoRamón Calvo

15.4k
64
17
38
A super-fast linux-based machine with multiple GPUs for training deep neural nets
Project Owner Contributor

32-TFLOP Deep Learning GPU Box

robotbugsrobotbugs

12.1k
69
4
57
Porting the classic Doom engine to an FPGA-based system
Project Owner Contributor

FPGA Doom

matt-stockMatt Stock

9.3k
523
8
57
Well, this is the next evolutionary step from when I first bought the Plab 2.5 spectrometer kit
Project Owner Contributor

DAV 4 UV/VIS Spectrometer

david-h-haffner-srDavid H Haffner Sr

7.4k
67
5
42
with Arduino and beyond. . .
Project Owner Contributor

Explore M3

sandeep-patilSandeep Patil

7.4k
597
5
29
Making heart implant collected data accessible to the patients by sniffing RF transmissions
Project Owner Contributor

ICeeData

aryaArya

7.1k
91
3
61
A wearable, high-performance ECG device, aimed at heart patients, athletes and more
Project Owner Contributor

OpenECG

alex-lunguAlex Lungu

6k
2k
3
35
A standalone, open-source thermal imager which can be built for under $50 in parts.
Project Owner Contributor

LCIRIC - Low Cost Infrared Imaging Camera

josh-langeJosh Lange

5.9k
87
0
13
Sold as "1pps only", this affordable eBay find is a playground for reverse-engineering, with a few useful laboratory applications.
Project Owner Contributor

Hacking a FE-5680B rubidium reference clock

yann-guidon-ygdesYann Guidon / YGDES

5.7k
46
7
39
A 3D Graphics Accelerator for FPGAs
Project Owner Contributor

QuickSilver Neo: Open Source GPU

ruud-schellekensRuud Schellekens

4.9k
73
3
69
A versatile IOT device designed to track 8 air parameters and map pollution, with both wired and wireless Internet connectivity
Project Owner Contributor

uRADMonitor A3

radu-motisanRadu Motisan

View all

Share this profile

Share

Bits

Isak Johansson wrote 05/19/2020 at 17:17 • point

Hey guys, Daniel i'd appreciate it very much if u could tell me how the reset pin works on DB504 board, i think it is that one. I got a Worx Landroid WG790E.1. I will help or donate to compensate for your time.

  Are you sure? yes | no

Radu Motisan wrote 07/15/2016 at 13:01 • point

Daniel, thanks for following the uRADMonitor project, the environmental monitoring network covering now, the entire planet. If you want to support the development (but also help with the Igg campaign), you can purchase one of the available detectors on https://www.indiegogo.com/projects/uradmonitor , the solderable KIT1 for instance was very well received by the Makers community, and there is also an ongoing competition on http://www.uradmonitor.com/topic/soldering-the-kit1/ . Thanks again, Radu

  Are you sure? yes | no

Sandeep Patil wrote 05/02/2016 at 13:42 • point

Thanks for following Explore M3

  Are you sure? yes | no

Sandeep Patil wrote 05/02/2016 at 13:42 • point

Thanks for following Explore M3

  Are you sure? yes | no

ottoragam wrote 02/18/2016 at 01:37 • point

Hi Daniel, thanks for the follow!

  Are you sure? yes | no

Eric Hertz wrote 11/11/2015 at 06:42 • point

Howdy! Thanks for the skull!

  Are you sure? yes | no

Eric Hertz wrote 08/17/2016 at 05:49 • point

And another, Thanks! And, funny "Who I am"

  Are you sure? yes | no

ProtoVoltaics wrote 07/14/2015 at 17:34 • point

Thanks for following our Pick and Place project!

  Are you sure? yes | no

Send a private message to Daniel Wiegert

Become cool instantly

Create your Hackaday.io profile like Daniel Wiegert and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Daniel Wiegert", please tell us the reason.