0%

0%

joychaudhary004

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/26/2020.

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

Miguel Ayuso Parrilla

Single rotor, "singlecopter", selfmade drone with air vanes for position control as a full remake of the Ball-Drone Project

The Ball-Drone Project MK II

Benjamin Prescher

Making my own automatic chessboard

Automatic Chessboard

Hackaday Prize 2019

A dynamics oriented quadruped for research and education.

SmallKat: An adorable dynamics oriented robot cat

Kevin Harrington

K3lso is a quadruped robot similar to MIT mini cheetah and MIT Cheetah 3.

K3lso Quadruped

Hackaday Prize 2020

Mostly 3D printed HAWT windturbine incl. 3D printed disk-generator and brake system.

WinDIY - HAWT Wind turbine

A better-than-servo motor for robotics

Custom motor for robotics

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

2021 Hackaday Prize

Your 3D content on a real PoV volumetric display, no glasses needed!

VVD: an open source Real 3D Volumetric Display

Madaeon Madaeon

The PERSEUS-8 is the enhanced version of the minimum configuration type the PERSEUS-7 6502 computer

PERSEUS-8 homemade 6502 computer

2021 Hackaday Prize

The PySpectrometer is a Python (OpenCV and Tkinter) implementation of an optical spectrometer for the Raspberry Pi.

Raspberry Pi Spectrometer

Hackaday Prize 2020

UnifiedWater is an IoT empowered, smart water quality monitoring device enabling remote data collection and visualisation on a dashboard.

UnifiedWater

The second version of quadrupedal robot based on custom brushless actuators

Wolfie

Peter Wasilewski

2021 Hackaday Prize

Cheap, Open-source, safe, and compliant 6 - Axis 3d printed robotic arm based on Quasi direct drive BLDC drives.

CM6 - Compliant 3D printed robotic arm

A (sort of) low cost CNC with broad capabilities and low storage volume

High performance dorm room CNC

Building a brushless quadruped for under $1000

My Journey of Building a Performance Quadruped

Open source MSX2 compatible computer

Omega Home Computer

2021 Hackaday Prize

Using 3D Magnetic sensor to visualize a magnet's pole direction, heading, virtual field line & strength on an E-ink Display

Magnetic Field Visualizer

View all

Bits

Mitsuru Yamada wrote 10/02/2021 at 02:32

Thank you for liking my #PERSEUS-8 homemade 6502 computer ! After three months of hard work, I was able to build a floating point interpreter using only switches inputs on this computer, and I found that I could do scientific and technical calculations as well as PCs 40 years ago.

Are you sure? yes | no