0%

0%

udif

Chip designer, playing with other stuff as well

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 09/03/2015.

Proud member of

Projects I Like & Follow

A maker friendly capstan based BLDC driven quadrupedal robot kit.

Stanley - the capstan based quadruped kit

Supplyframe DesignLab: 2023 Hackada…

Open-Source Infrared Remote Using ESP32 and LVGL

OMOTE - DIY Universal Remote

Customizable OLED keyboard that adapts to the apps you use

Keybon – Adaptive Macro Keyboard

2021 Hackaday Prize

Make robotics easier for schools, enthusiasts, and beyond.

Mini Pupper: Open-Source,ROS Robot Dog Kit

afreez-gan Afreez Gan

Super easy way to make a microscope with a DVD pickup with Analog Discovery

DVD pickup LASER microscope

kuriuzu kuriuzu

Supplyframe DesignLab: 2023 Hackada…

Raspberry pi based open source device with SDR and easy to use controls for exploring RF signals and data.

SDR dock 1.0

kaushlesh-c-kd9vfu Kaushlesh C. ( KD9VFU )

Open-source and open-hardware custom scientific RPN calculator

OpenRPNCalc

anton-poluektov Anton Poluektov

Supplyframe DesignLab: 2023 Hackada…

Modular Autonomous Quadruped Robot Project (Open Source)

LOTP Robot Dog V2

limenitis-reducta Limenitis Reducta

Replace your old 78xx voltage regulators with this much more efficient pin-compatible buck converter.

78xx Replacement

stefan-wagner Stefan Wagner

2021 Hackaday Prize

PnPAssist is a tool that helps you to assemble PCB boards manually.

PnPAssist

nuri-erginer Nuri Erginer

An easy-to-use, customizable, lightweight and open-source 32-bit RISC-V microcontroller/CPU written in platform-independent VHDL.

The NEORV32 RISC-V Processor

Use a (D)SLR to "scan" analog film negatives and positives with 3d printed holding frame.

Scan analog film. For the very last time.

Open source KVM switch made for the PiKVM that not only switches the HDMI and USB signals but also the ATX signal.

Pi-Cast KVM Switch

The MCL86 is a cycle accurate microsequencer-based FPGA core which can be used as a drop-in replacement for the Intel 8088 or 8086.

MCL86 - Cycle Accurate Intel 8088 FPGA Core

ted-fried Ted Fried

Useful tool for testing, and determining characteristics of LEDs, as well as a calculator for calculating the series resistor

How to make Arduino LED Tester + Resistor Calc.

mircemk mircemk

I needed a place to hold my scope probes above the festoon of wires and junk on my bench. Here's my solution.

Scope Probe Caddy

Can I build a working metal detector from what's in my junk box?

Junk Box Metal Detector

Getting a hand-written Assembly Forth running on the 32-bit Longan Nano

Forth powered RISC-V microcontroller

alexander-williams Alexander Williams

View all

Bits

robert wrote 05/09/2018 at 02:18

Thanks a lot for following # Magical box for Resuming 3D Prints automatically.

Are you sure? yes | no

arief ibrahim adha wrote 12/31/2017 at 09:23

Thank you for following #ALio : New Hardware Prototyping Platform. Support us on https://www.crowdsupply.com/aerd/alio-proto-board

Greeting from Indonesia.

Are you sure? yes | no

Dave Vandenbout wrote 10/13/2015 at 14:01

Thanks for the follow!

Are you sure? yes | no

Eric Hertz wrote 09/10/2015 at 09:14

Howdy! Thanks for the follow!

Are you sure? yes | no

Eric Hertz wrote 03/20/2016 at 09:57

And another, Thanks!

Are you sure? yes | no

Eric Hertz wrote 07/23/2016 at 20:10

Thanks for "all the follows"!

Are you sure? yes | no