0%

0%

theo.mammuth

DIYer

Rhone-Alpes

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/12/2015.

Projects I Like & Follow

Design, development and build of an open-sourced SLS 3D Printer suitable for hobby users.

SLS4All - Affordable SLS 3D Printer

tomas-starek Tomas Starek

How much air assist is needed when working with a LED laser diode

Laser Air Assist Shootout

david-tucker David Tucker

Supplyframe DesignLab: 2022 Hackada…

High resolution Distance sensor for 3D printer Bed Leveling

Fast Bed leveling sensor

PCB linear motors offer a different approach to powering tiny scale model trains, cars, boats, etc.

PCB Linear Motors for Model Trains

There are a lot of cheap audio bluetooth IC available in cheap these days. I got a bunch of them and here is my project.

I Made my own Audio Bluetooth module

A lost art, that few can still use, and guard viciously as a company secret.

Universal Coil winding Machine

2021 Hackaday Prize

low power laser projector for AR glasses to display vector graphics

AR Glasses

Put aside your FPGAs and high performance oscilloscopes - Here's a two-chip solution to your reverse engineering needs

Dumping Firmware With a 555

jarrett Jarrett

Desktop solder paste dispenser that works with disposable Co2 cartridges

Solderocket

nuri-erginer Nuri Erginer

2021 Hackaday Prize

An open-source manual pick and place machine for PCB artisans

Pixel Pump Pick & Place

robin-reiter Robin Reiter

A low cost laser bed for the MultiBot machine

MultiBot Laser Bed

david-tucker David Tucker

Ever wondered if your batteries are any good? I built a tester with data logging and tested every battery I could get my hands on.

Battery Analyzer MkII: Alkalines

moragor Moragor

Handheld Thermometer for measuring high temperatures

Handheld Thermocouple Thermometer

Custom Spot Welder machine based on MOT

Spot Welder

Ultra simple Z-axis table design, good enough for focus automation for different materials.

Cheapest Possible Motorized Laser Z-Axis Table

timo-birnschein Timo Birnschein

2021 Hackaday Prize

Reliable hardware designed by robots

SOL75 - a 3D customizer

Cooling FAN Controller Using an LM35 (No MCU)

Cooling FAN Controller Using an LM35 (No MCU)

hesammoshiri hesam.moshiri

Building an AQI sensor with off-the-shelf parts and 3D-printed case

Portable Air Quality Sensor

View all

Bits

Andy wrote 10/24/2021 at 06:27

Thank you for liking my #Spot Welder project ;).

Are you sure? yes | no

bob wrote 12/20/2020 at 04:11

Thanks for taking an interest in my Electrochemical Machining demo.

Are you sure? yes | no

Patrick Van Oosterwijck wrote 12/02/2020 at 23:34

Thank you for your interest in my #LiFePO4wered/Pi400 project Theo!

Are you sure? yes | no

Cat wrote 08/24/2020 at 15:49

Thank you for liking my project: https://hackaday.io/project/173544-free-cooling-of-food-or-rooms-in-hot-climates

Are you sure? yes | no

Brian Cornell wrote 06/11/2019 at 01:32

Thanks for liking https://hackaday.io/project/165458-350-watt-true-sine-inverter

Are you sure? yes | no