0%

0%

hardbio

electrotechnical engineer autonomous systems

porto Portugal

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/10/2015.

Projects I Like & Follow

The 2015 Hackaday Prize

A printable robot arm, a little bigger than the usual hobby servo once.

3D Printable Robot Arm

andreas-hoelldorfer Andreas Hoelldorfer

The 2016 Hackaday Prize

OpenSource 3D printable Robotic Arm

Thor

angellm AngelLM

Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.

DIY Pick and Place

anthonywebb anthony.webb

Goal: To assemble a working CO2 Laser from a minimum investment using only tools one can find at your average home improvement store.

Low Cost CO2 Laser Build

FarmBot is an open-source CNC farming machine and software package built for small scale, hyper local, DIY food production.

FarmBot - Open-Source CNC Farming

rory-aronson Rory Aronson

Official Hackaday Prize Entry

How I did to remotely control and monitor my home made Off-grid Photo voltaic System

My Off-grid Solar System Monitoring

michel-kuenemann Michel Kuenemann

The 2015 Hackaday Prize

Converting a car to electric drive using recycled and salvaged EV and hybrid components.

DIY Electric Vehicle from Recycled Parts

The 2016 Hackaday Prize

A Raspberry Pi based Astrophotography System

StarPi

Official Hackaday Prize Entry

Recording weight, hive temperature, and weather data toward better management and understanding of honeybees.

Honeybee Hive Monitoring

ken-meyer Ken Meyer

Official Hackaday Prize Entry

A cheap, yet surprisingly good rendition of a 3D scanner

3D(ollar) Scanner

joshua-conway Joshua Conway

Homemade X/Y-Table to mill PCBs and etch materials like leather with a Laser

Homemade PCB-Mill / Laseretcher

Official Hackaday Prize Entry

A home built equatorial mount for my telescope built mostly recycled components I have had lying around.

DIY Harmonic Drive Equatorial Mount

jerry-biehler Jerry Biehler

The 2015 Hackaday Prize

ProtoVoltaics Pick and Place Machine Project

Pick and Place Machine

Official Hackaday Prize Entry

A solar energy system up to 500W in power for use with lithium batteries.

Solar Energy Generator

nathaniel-verlee Nathaniel VerLee

The aim of this project is to make a desktop cnc machine with at least A3 working area (420x297 mm), Z < 100mm with sub 300 EUR budget.

CNC desktop laser/dremel mill/microscope

Official Hackaday Prize Entry

A heavier duty 3D printer that replaces 3 machines

3-In-1 Desktop, CNC and Laser Engraver

Official Hackaday Prize Entry

Mini Mill that can be cut using a 3020 laser engraver

Laser Cut Mini Mill

wudagem Wudagem

Official Hackaday Prize Entry

DC motors can drive CNC machines too!

CV closeloop CNC

View all

Bits

Michel Kuenemann wrote 08/25/2016 at 08:39

Hi. Thanks for following my PV monitoring project. Michel

Are you sure? yes | no

T3rr0rByte13 wrote 03/10/2015 at 19:55

thanks for the follow

Are you sure? yes | no

samern wrote 03/10/2015 at 19:07

Thanks for the follow!

Are you sure? yes | no