0%

0%

harunkurt.me

ı am student

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 10/06/2022.

Projects I Contribute To

This board is simply a shield of sensors that can be attached to any Raspberry Pi Zero, Zero2, 3, 4 and run Ardupilot Firmware.

OBAL Board - DIY Ardupilot on Linux

Projects I Like & Follow

In this period of isolation, I'm trying to build an oximeter with parts already in house. An oximeter is made by two leds and a photodiode.

Oximeter do it yourself

2021 Hackaday Prize

the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

My 4 axis motion control rig

Motion Control Rig - 0.1.0

There are a lot of cheap audio bluetooth IC available in cheap these days. I got a bunch of them and here is my project.

I Made my own Audio Bluetooth module

Easy to use Arduino Uno Shield to support your rockets from the ground!

WOOF Model Rocket Launchpad Computer V4

Canine-Rocket-Technologies

Control two relays from Blynk or Touch Sensor using NodeMCU DHT11 sensor and LDR with real-time feedback.

Home Automation With NodeMCU LDR DHT11 Sensor

Multi-Functional Custom Robotic Research Platform

PROJECT MOOBA

Simple UPDI Programmer for tinyAVR, megaAVR and AVR-Dx Microcontrollers based on CH340N

SerialUPDI Programmer

Battery is dead so the bench supply jumps in

Bench Supply Bluetooth Speaker

In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.

LoRa IoT Project With Arduino ESP8266 Blynk

This board is simply a shield of sensors that can be attached to any Raspberry Pi Zero, Zero2, 3, 4 and run Ardupilot Firmware.

OBAL Board - DIY Ardupilot on Linux

Texas Instruments power modules are very rare, so much so that scam sites sell them for over $800

$800+ Power Module put to good use

Cheap Piezoeletric crystals could be used both as movement sensors and vibrational haptic simulators.

DIY Full-body VR Rigid Haptic Suit

A bluetooth musical tesla coil, but fully on a pcb, NO COILS, and also only powered by one 12v supply.

BLUETOOTH MUSICAL PCB TESLA COIL

HIGHVOLTOMANIAC

Supplyframe DesignLab: 2022 Hackada…

An opensource TEG energy harvesting module that can be used to harvest electricity from any 2 temperature differentials.

Open TEG Harvesting Module 2.0

A box allowing PC ports and buttons to be placed conveniently while removing a desktop PC from valuable real estate.

PC Remote Control Head

Programming the Raspberry Pi Pico using Arduino IDE is quite simple nowadays. Let's setup your one to getting started

Program Raspberry Pi Pico Using Arduino IDE

Making video recorder for IP-cameras in retro Atari XC12's case.

Atari XC12 becomes video recorder

View all

Bits