0%

0%

David

3D Printing & Open Source

United States

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 02/16/2019.

My Projects

A Complete 3D Printed Parts Kit for the ZYLtech Hypercube 300 Dual-Z DIY Full Kit with 12v Heat Bed Option !

Hypercube Remix

Things I've Built

Hypercube Remix

https://www.thingiverse.com/thing:3291672

Projects I Like & Follow

The 2015 Hackaday Prize

Developing a small fuelless microwave thruster

EMDrive/satellite

paul-kocyla Paul Kocyla

Building an open source robot arm for makers and small businesses

5+ Axis Robot Arm

dan-royer Dan Royer

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Official Hackaday Prize Entry

A program for custom voice commands to the Raspberry Pi. Make your RPi send emails, play videos, check the weather, and more using speech.

Voice Controlled Raspberry Pi

steven-hickson Steven Hickson

Zmodo have some cool cameras! This project is about reversing protocols / bins of all things zomodo to bypass the cloud.

Zmodo - Local Controller

Hackaday Prize 2019

A low-cost, high-performance bipedal walking robot

Blackbird Bipedal Robot

The 2018 Hackaday Prize

high-end open-source printer with a water-cooled tool changer.

Blackbox - Tool Changing 3D Printer

marc-schmann Marc Schömann

Hackaday Prize 2019

Blackbox shifts 3D printing towards a multitool manufacturing robot.

Multitool 3D Printer - Blackbox

marc-schmann Marc Schömann

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

The 2015 Hackaday Prize

Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.

biohand - Low cost 3D printed hand prosthesis

martin-vincent-bloedorn Martin Vincent Bloedorn

A digital 24 hour clock using only relays and diodes for the counting logic.

Relay Logic Clock

dave-gnner Dave Gönner

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

jon-klein Jon Klein

75x40 mm, 6 layer PCB, Xilinx XC7Z7010 FPGA, dual core ARM Cortex-A9, 32Mbyte Flash, SD, microSD, Bluetooth, 100 mil headers, single 3.3V

Open Source HW: Xilinx ZYNQ7000 System on Module

antti-lukats Antti Lukats

The 2017 Hackaday Prize

4+ custom bands multispectral camera based on RasPi 3 and raspi camera multiplexer with geotagging and environmental montoring capabilities

RPi Multispectral Camera for Agriculture

Andres Felipe Gomez R.

Raspberry Pi Zero Ledstrip Controller to control a RGB ledstrip via the browser of your phone or pc.

Raspberry Pi Zero Ledstrip Controller

marcel-brouwers Marcel Brouwers

The 2015 Hackaday Prize

A low cost, full featured open source, industrial camera

Open Source Industrial Smart Camera

Cheap DC powered LED Grow Light design, using off the shelf components and hardware store building supplies

Simple DC LED Grow Light

View all

Bits