0%

0%

Josh

I like to learn and read. Trying to get myself to actually build stuff more.

CA

Following Follow me

Similar accounts worth following

This user joined on 04/02/2020.

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

Hackaday Prize 2019

Environmental sensing for everyone.

FieldKit

shah-selbe Shah Selbe

A compact modular design of the strain wave gear for general robotic applications.

Compact Strain Wave Gear Actuator(s)

Developing DIY, cheap, open-source pressure control ventilator (PCV) design to save millions of hospital and home pandemic patient lives

Pandemic Pressure Control Ventilator

Setup MetaTrader on your ARM device and an automated trading robot for Forex

MetaTrader 4 on Raspberry Pi or any other ARM

An open source Pellet Extruder for large format 3D Printing

Pellet Extruder

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion-mclionhead lion mclionhead

A robot that moves vertically on the pipe.

Pipe Climbing Robot

Anastasiia Zelenska

The 2017 Hackaday Prize

Control your mobile device remotely without using the touch screen

Tactile Remote Control of a Mobile Device

kyle-thomas Kyle Thomas

Keep your plants alive by sensing their soil moisture levels, and watering when needed. Monitor it all from a LAN webpage.

Automated Plant Watering with Raspberry Pi

Hackaday Prize 2020

An intelligent clinical thermometer that can distinguish between colds and flu

F°LUEX

m-bindhammer M. Bindhammer

Take an small robotic arm (MeArm) and a dev board with more processing power than necessary (Jetson TX2). What could go possibly go wrong?

Ty the Typing Robot

elecia-white Elecia White

The 2018 Hackaday Prize

The Firefly is a DIY $5 hardware wallet for the Ethereum blockchain, with a secure air-gapped solution that is mobile-friendly.

Firefly Hardware Wallet

richard-moore Richard Moore

The 2018 Hackaday Prize

The project focuses on an open source design of a gripper with tactile sensor system for robotic hands and exoskeletons

Open source Tactile sensor enabled robotic gripper

aman-garg Aman Garg

Use 3D printing to solve the “Growing Chaos” problem

Germinate Seeds With a 3D Printed Container

Always fascinated with the Enigma, I'm planning to fully model (Fusion 360) and 3D print a full-scale 3-rotor Enigma.

3D Printed Enigma Machine

Design and build a hand-held AVR-ISP adapter using Pogo pins

AVR ISP POGO PIN ADAPTER

The 2018 Hackaday Prize

An Automated Snacks serving Robot For Smart Homes and Hospitals

Robo-Butler

tanuj-kashyap Tanuj Kashyap

View all

Bits