Close
0%
0%

Matin Barrera

I'm a software engineer student from Argentina.

Cordoba, Cordoba, Argentina
Following
Send a private message
Similar accounts worth following
1 Followers
32 Following
0 Projects
0 Likes
matin-barrera
Send a private message

This user joined on 10/26/2019.

57.5k
1.5k
4
107
Adding a "real" lens to Fujifilm's first (and only) analog square format instant camera.
Project Owner Contributor

Instax SQ6 Lens Transplant

kevin-kadookaKevin Kadooka

20.9k
5.5k
16
135
Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.
Project Owner Contributor

3D scanner

jolarJolar

19.4k
3.9k
82
77
Make Raspberry Pi Again
Project Owner Contributor

Raspberry Pi project

aryaArya

19.1k
1.4k
2
58
Tracking human motion for digital animation.
Project Owner Contributor

Optical motion capture system

robert-gowansRobert Gowans

11.4k
4.4k
0
30
4 Digit Nixie Clock driven by Raspberry Pi Zero and Arduinix board.
Project Owner Contributor

Raspberry Pi Zero Nixie Clock

maksim-surguyMaksim Surguy

8k
6.5k
3
41
This will emulate the AVR code right out of the .ELF file
Project Owner Contributor

Arduino ATmega 328 Emulator

tehaxor69tehaxor69

6.4k
32
2
21
Pint-sized DIY Onewheel based on Hoverboard electronics, heavily inspired by ZbLab's progress.
Project Owner Contributor

DIY Onewheel

mattMatt

6k
2.5k
0
3
Raspberry Pi 3B based robot, distance sensors, and ROS.
Project Owner Contributor

Wall Following and Obstacle Avoidance

sinclair-gurnySinclair Gurny

5.8k
4.4k
2
30
This is low cost 3d printed robot arm based on Ikea Tertial lamp.
Project Owner Contributor

Tertiarm - 3d printed robot arm

anastascaranastas.car

5k
5.1k
1
16
This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32
Project Owner Contributor

Electric Bobby-Car

peter-ptziPeter Pötzi

4k
3.5k
0
12
Turned an antique intercom into an Amazon Echo
Project Owner Contributor

50s Intercom Raspberry Pi Echo

nickrbrewernick.r.brewer

3.9k
1.8k
0
16
04K - 50K LUT. Kicad. Open source. Pin header 1.27mm. 92 IOs. Breadboard-compatible. Lots of optional GND.
Project Owner Contributor

Altera MAX10 Breakout Board

lars-rLars R.

3.6k
3.6k
20
47
An educational system designed to bring AI and complex robotics into the home and school on a budget.
Project Owner Contributor

Cardware

morningstarMorning.Star

3.1k
3.1k
0
33
Use any Bluetooth 4.0(BLE) device to control this agile little modular drone.
Project Owner Contributor

The UnbreakaBLE Micro Drone

anshul-sanamvenkataAnshul Sanamvenkata

2.2k
2.2k
5
14
I'm attempting to recycle my household plastic into usable 3D printer filament
Project Owner Contributor

Recycling Household Plastic for 3D printing

emEM

1.5k
1.6k
0
4
Using the Raspberry Pi to get weather from the internet
Project Owner Contributor

Raspberry Pi Weather App

vaneh-boghosianVaneh Boghosian

1.1k
1.1k
0
5
Developing a simple and inexpensive microscope based on the RPi to be used in education and by citizen cientists
Project Owner Contributor

An inexpensive Raspberry Pi based microscope

h-fehrH Fehr

1k
1k
0
1
Using red pitaya to create calibration tables
Project Owner Contributor

Using red pitaya for long time data logging

marcel-ochsendorfMarcel Ochsendorf

View all

Share this profile

Share

Bits

Send a private message to Matin Barrera

Become cool instantly

Create your Hackaday.io profile like Matin Barrera and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Matin Barrera", please tell us the reason.