0%

0%

Ivan Stepaniuk

If it works, take it appart to see how

Amsterdam

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/26/2014.

My Projects

Hacking my home's classic ON/OFF wall thermostat, right into 2020

Old thermostat learns new tricks

Automatically open the dishwasher when it finishes to improve drying

Automatic dishwasher opener

A 3D-printed, 7-segment clock using home-made black-to-white thermochromic paint

Thermochromic paint clock

Hardware to interface with an OpenTherm enabled boiler

OpenTherm interface

Turning grandma's old and rusty rim lock into an electrically actuated smart lock

Ancient lock gets smart

A spectroscope that just works, good enough to tell good from bad lights for growing plants

3D-Printed spectroscope

View all 8 projects

Projects I Like & Follow

Voron Switchwire - DarekNorway Build Log

Voron Switchwire 3D Printer

A maker friendly capstan based BLDC driven quadrupedal robot kit.

Stanley - the capstan based quadruped kit

K3lso is a quadruped robot similar to MIT mini cheetah and MIT Cheetah 3.

K3lso Quadruped

Modified Chroma74 shelf label to be my weather station display. It is 7.4" 3-Color E-Ink units that cost $12 on eBay.

7.4" E-Ink Shelf Label used as a Weather Station

Conversion of the existing apartment ventilation. Implemented with an ESP8266.

Smart Apartement Ventilation

USB PC gearbox based on arduino with 12 buttons

DIY Simracing H-Shifter (USB PC gearbox)

An ESP32-based soil moisture sensor.

w-parasite

Raphael Raphael

This is a Walking ATAT using 8 Servos. Great robotics project!

Motorized Walking ATAT using Servos and Arduino

Wego ASCII weather app running alone over Raspberry Pi. It only use xinit and some optimizations.

ASCII Weather Station

OPEN SOURCE / 3D printed robot. Arduino M0 based and created using common elements from the Makers/ 3D printers World.

PyBot SCARA Robotic Arm (3D printed + Python)

I want to make a scale model VT100 terminal for use with my 2:3 scale PiDP-8/I.

2:3 Scale VT100 Terminal Reproduction

2021 Hackaday Prize

An almost completely 3D-printable shredder that can be used to shred 3D-prints ;-)

3D-printable shredder

The Valden Heat Pump controller is an open source platform to precisely control heat pumps.Can be used for DIY HPs or to repair old systems.

Valden: Heat Pump controller

Recreation of a Sinclair ZX81 (dual rom 80/81) based on Grant Searle's project.

ZX80/81 Homebrew Clone

Transfer digital pictures on to analog b&w paper with a monochrome LCD and a darkroom.

Digital Picture to Analog Darkroom print

A 3D printed, double sided view, Belgian Railway Station Clock, synchronized with the network time.

Belgian Railway Station Clock

A project for storing facts, general rules, not very well known information only found in scientific books/articles and forgotten knowledge.

Microwave stuff - what to do and what to avoid

MS-BOSS MS-BOSS

Automating the tiresome process of squishing coffee

Automated Cafetière

View all

Bits

Michael Gardi wrote 02/15/2021 at 00:03

Thanks for following my 2:3 Scale VT100 project Ivan.

Are you sure? yes | no

Ivan Stepaniuk wrote 01/20/2015 at 22:22

Hack a day, hack a site! --istepaniuk

Are you sure? yes | no