0%

0%

Justin Haenel

Entrepreneur

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 11/01/2021.

Projects I Like & Follow

Hackaday Prize 2019

This hybrid generator for drones is designed to get 10 times the flight time of a classic electric drone

HYBRID GENERATOR FOR DRONES

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-woo Timothy Woo

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

hugo-melder Hugo Melder

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

kristjan-berce Kristjan Berce

2021 Hackaday Prize

Miniature, modular pneumatics toolkit for control & sensing of Soft Robots and Programmable Materials, developed at MIT Media Lab

FlowIO Platform

ali-shtarbanov Ali Shtarbanov

Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!

LadyBug BEEFY: 3D printer motorized microscope

ahron-wayne Ahron Wayne

Hackaday Prize 2019

Automated barbecue and smoker on a budget

Smokey Mc Smokerson

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

alex-rich Alex Rich

A multi-mode scanner and data logger based on Adafruit Feather & Arduino

Science Tricorder by Olympus Heavy Industries

DIY ESP32 camera board with OLED display, RGB LEDs, SD card & light sensor

ESP32 Camera board

miroslav-zuzelka Miroslav Zuzelka

The 2018 Hackaday Prize

Open-Source companion robot for teaching and playing

Rhoby.The Social Robot.

ilyas-akhmetzyanov Ilyas Akhmetzyanov

The 2018 Hackaday Prize

UNMANNED GROUND VEHICLE, Compatible with Arduino

M1 Rover

ahmed-azouz Ahmed Azouz

A project for my grandchildren to first build line-following robots then convert them to being controlled by their phones and tablets.

IP control for inexpensive line following robots

2021 Hackaday Prize

Thenar is the portable electronic Braille book, that was invented to replace >$1000 Braille displays that are available on a market.

Thenar - portable and affordable Braille book

adzhusupov A.dzhusupov

The 6502 Companion is intended to be a development / learning environment for the 6502 microprocessor.

The 6502 Companion

josh-kittle Josh Kittle

21 Silicon Wafers, the kinds used to make computer chips, arranged on laser-cut acrylic & held in place with 3D-printed Stargate Chevrons

Silicon Wafer Wall Artwork

rium-mike-ando RIUM+ (Mike Ando)

Python Signal-Processing Implementation for improved Translation of Brain Activity.

EEG + Touch Designer "Brain Machine 4"

jess-tamez-duque Jesús Tamez-Duque

ChatterPi is a software package that turns a Raspberry Pi into a low-cost audio servo controller for talking props.

ChatterPi

aspiring-roboticist Aspiring Roboticist

View all

Bits