0%

0%

jlmyra

Mechanical Engineer

NJ

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/17/2016.

My Projects

This project features a 4 motor robot rover controlled with a BLYNK virtual Joystick over a Low Energy Bluetooth (BLE) connection.

Robot Rover - iPhone controlled via Blynk Joystick

This arduino based device measures, records and uploads T, RH, BP data to ThingSpeak

Arduino-IoT enabled dual BME280 HygroThermoGraph

Projects I Like & Follow

The 2016 Hackaday Prize

An open-source ultrasound imaging dev kit side project

Murgen: open source ultrasound imaging

kelu124 kelu124

Hackaday Prize 2019

Fun-on-a-Keychain is back, packing all your games and multiple emulators in a cute and extremely tiny handheld console.

FunKey project - All your games on your keychain !

Single rotor, "singlecopter", selfmade drone with air vanes for position control as a full remake of the Ball-Drone Project

The Ball-Drone Project MK II

Benjamin Prescher

Hackaday Prize 2019

A dynamics oriented quadruped for research and education.

SmallKat: An adorable dynamics oriented robot cat

Kevin Harrington

The 2016 Hackaday Prize

Open Autonomous Domestic Robots – An open source system for domestic cleaning robots using low-cost hardware

Open Autonomous Domestic Robots

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Hackaday Prize 2019

A multimeter, based on the STM32F373, which can measure voltage, current and power (both bipolar and DC or true RMS with multiple ranges).

STM32 Open Source Multimeter

Connect up to 16 ultrasonic range sensors to an Arduino with I2C bus and one pin

HC-SR04 I2C Octopus "octosonar"

Hackaday Prize 2020

Raspberry Pi 0 W + High Quality Camera = High-quality USB Webcam!

Raspberry Pi 0 HQ USB Webcam

An Arduino-based device connected to the interwebs by GPRS to monitor and log events online using Carriots and Google Sheets

Internet-connected monitoring with Arduino & GPRS

adria.junyent-ferre

Hi, I'm edog, I'm a robotic project under development. I will participate to the eurobot cup 2021 in July and will become open source

Edog - Mini 3D printed Quadruped Robot ✨

Gaultier Lecaillon

5V daisy chained neon bulbs. For glowing neon lovers.

Neon Pixels

Hackaday Prize 2020

MABEL (Multi Axis Balancer Electronically Levelled) is a unique arduino/Raspberry Pi self balancing robot with movable legs.

MABEL - A Boston Dynamics inspired balancing robot

The 2017 Hackaday Prize

A flexible, simple, yet powerful FPGA development board.

Spartan Mini

It can detect a metal coin at 15cm +, and bigger metal objects at 50cm and more.

DIY sensitive Arduino IB Metal Detector

mircemk mircemk

Add USB charging to UV3 radio

Baofeng UV3 USB charging station conversion

A life-sized R2-D2

3D Printed R2-D2

2021 Hackaday Prize

A 3D printable glider design dynamically generated from aerodynamic parameters

Customizable glider

View all

Bits