Close
0%
0%

John Allan

Open biotech and science enthusiast

Following
Send a private message
Similar accounts worth following
1 Followers
22 Following
2 Projects
0 Likes
john-allan
Send a private message

This user joined on 12/21/2020.

0
0
0
Hacking a USB mug warmer to be used in bio projects
Project Owner Contributor

Bioplate

John AllanJohn Allan

92
0
0
0
An arduino-based monitoring system for kombucha brewing
Project Owner Contributor

Buchmonitor

John AllanJohn Allan

34.3k
2.4k
36
86
Breaking the encryption on the Lerdge series mainboards so I can try porting Marlin 2.0 to it.
Project Owner Contributor

Lerdge 3d Printer Mainboard Hacking

J.C. NelsonJ.C. Nelson

20k
2.1k
13
140
This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.
Project Owner Contributor

Smart Motor Driver for Robotics

Danny FRDanny FR

17.8k
2.7k
15
223
Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.
Project Owner Contributor

Bobble-Bot

Mike MooreMike Moore

11.3k
2k
0
62
printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation
Project Owner Contributor

3D Printed Strain Wave Gear

Johannes HasslerJohannes Hassler

8.5k
1.4k
6
80
Publys is an open source platform for the study and processing of bioelectric signals.
Project Owner Contributor

Publys: An open source biosensing board

EverEver

7.5k
2.2k
0
24
Basic interpreter for the ESP8266 wifi SOC
Project Owner Contributor

ESP8266Basic "A basic interpret for your esp"

mmiscoolmmiscool

7k
763
2
38
Atltvhead is a mashup of interactive art and wearable technology with a message of positivity and encouragement to let your oddities shine!
Project Owner Contributor

ATLTVHEAD

nate.damennate.damen

5.7k
1.9k
10
13
Teach programming, electronics, and mechanics with the Kano Computer and Snap Circuits.
Project Owner Contributor

Raspberry Pi 3 Desktop a 7-yr-old Can Build & Use

Steve SchulerSteve Schuler

5.3k
2k
12
20
Matching the performance of an overmolded strain relief using 3D printing and flexible filaments
Project Owner Contributor

3D Printed "Molded" Strain Relief

Alex RichAlex Rich

4.7k
1.5k
0
25
Hardware and software to simplify FPGA development and interaction.
Project Owner Contributor

Nysa: FPGA Development Environment

DaveDave

3.9k
718
12
39
Explore the spark of life through circuit art
Project Owner Contributor

Electronic sculpture

Kelly HeatonKelly Heaton

2.9k
1.9k
10
18
UNMANNED GROUND VEHICLE, Compatible with Arduino
Project Owner Contributor

M1 Rover

Ahmed AzouzAhmed Azouz

2.7k
1.2k
2
31
Triple Cycloidal Brushless Actuator 25:1 Ratio
Project Owner Contributor

Simple Cycloidal Robot Leg for Quadruped

Paul GouldPaul Gould

2.4k
719
10
50
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project Owner Contributor

Open Exosuit for Differently Abled

Alex M SunnyAlex M Sunny

2.3k
980
0
13
Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.
Project Owner Contributor

Octoshield

GOODWINGOODWIN

2.1k
1.2k
3
24
Open Source Hardware GNU/Linux PowerPC Notebook project
Project Owner Contributor

OSHW GNU/Linux PowerPC Notebook

Roberto InnocentiRoberto Innocenti

2k
1k
0
6
a hardware sampler based on the raspberry pi running bare metal (so no Linux)
Project Owner Contributor

openSampler

Nick VerlindenNick Verlinden

804
770
0
21
just a flashing rgb led badge
Project Owner Contributor

Spacehuhn badge

davedarkodavedarko

View all

Share this profile

Share

Bits

Send a private message to John Allan

Become cool instantly

Create your Hackaday.io profile like John Allan and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2021 Hackaday

Report user as inappropriate

You are about to report the user "John Allan", please tell us the reason.